Mobil 1™ Formula M 5W-40
Mobil passenger-vehicle-lube , Canada
Product Description
Mobil 1 Formula™ M 5W-40 is an advanced performance synthetic engine oil designed to help provide exceptional cleaning power, wear protection and outstanding overall performance. Mobil 1 Formula M 5W-40 is engineered to help prolong the life of both diesel and gasoline powered automobiles that requires an oil that is approved against Mercedes Benz MB-229.5 specification.
Features and Benefits
Mobil 1 Formula M 5W-40 is made with a proprietary blend of high performance components and synthetic baseoils. Mobil 1 Formula M 5W-40 has been designed to help deliver outstanding overall performance and protection. Key features and potential benefits include:
Features |
Advantages and Potential Benefits |
Active cleaning agents |
Helps to reduce deposits and sludge build-up to enable long and clean engine life |
Outstanding thermal and oxidation stability |
Helps to reduce oil aging allowing extended drain interval protection |
Low oil consumption |
Less hydrocarbon pollution and less necessity to top-up |
Excellent low temperature capabilities |
Quick cold weather starting and fast protection. Also helps to extend engine life |
High Viscosity Index |
Excellent overall lubrication and wear protection performance for many driving styles and conditions, from mild to severe |
Applications
Mobil 1 Formula M 5W-40 is approved against Mercedes Benz MB-229.3 and MB-229.5.
It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Specifications and Approvals
This product has the following approvals: |
MB-Approval 229.5 |
MB-Approval 229.3 |
Properties and Specifications
Property |
|
Grade |
SAE 5W-40 |
Density @ 15 C, g/cm3, ASTM D4052 |
0.84 |
Ash, Sulfated, mass%, ASTM D874 |
1.4 |
Total Base Number, mgKOH/g, ASTM D2896 |
12.5 |
Mini-Rotary Viscometer, Apparent Viscosity, -35 C, mPa.s, ASTM D4684 |
15000 |
Viscosity Index, ASTM D2270 |
175 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
13.2 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
235 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
76.7 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
02-2021