Mobil 1™ 0W-16

Mobil passenger-vehicle-lube , Canada

Advanced Fuel Economy, Advanced Full Synthetic Motor Oil

Product Description

Mobil 1™ 0W-16 is a low viscosity, advanced full synthetic motor oil designed to help deliver outstanding engine protection and enhanced fuel economy* to keep your engine running like new and protect critical engine parts for up to 16,000 kilometers between oil changes**. Mobil 1 0W-16 meets or exceeds the requirements of the industry's toughest standards and outperforms our conventional and synthetic blend oils. Mobil 1 0W-16 is recommended for specific modern engines including select Honda and Toyota engines designed to operate on a SAE 0W-16 viscosity motor oil.

 

Features and Benefits

Mobil 1™ 0W-16 is engineered with a proprietary blend of high performance synthetic base stocks fortified with a precisely balanced component additive system. The low viscosity, advanced full synthetic formulation helps to increase engine efficiency and improve fuel economy*, while providing outstanding overall engine protection.

Key features and potential benefits include:

 

Features

Advantages and Potential Benefits

Low viscosity, advanced full synthetic formula

Promotes fuel economy* while keeping your engine running like new

Outstanding thermal and oxidation stability

Protects for up to 16,000 kilometers between oil changes**

Outstanding low temperature capabilities

Quick cold starting and fast lubrication to protect against wear

Active cleaning agents

Can clean up sludge left behind in your engine

 

Applications

Mobil 1™ 0W-16 is recommended by Imperial Oil for SAE 0W-16 applications in gasoline and hybrid engines designed to operate on SAE 0W-16 viscosity motor oil.

 

• Mobil 1 0W-16 is engineered for use in select Honda and Toyota gasoline and hybrid engines where this viscosity is recommended.

• Mobil 1 0W-16 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.

 

Always check your owner's manual for the manufacturer's recommended oil viscosity grade, API service classification and any builder approval.

 

Specifications and Approvals

This product meets or exceeds the requirements of:

API SN

API SN PLUS

API SJ

API SL

API SM

API SN Resource Conserving

API SN PLUS RESOURCE CONSERVING

API SP

API SP Resource Conserving

ILSAC GF-6B

 

Properties and Specifications

Property

 

Grade

SAE 0W-16

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

7.2

Density @ 15.6 C, g/ml, ASTM D4052

0.838

Flash Point, Cleveland Open Cup, °C, ASTM D92

228

Pour Point, °C, ASTM D97

-54

 

*Potential fuel economy improvement obtained by switching from higher viscosity oils to a lower viscosity grade. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions and your current motor oil viscosity. 
**Protection for up to 16,000 kilometers or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit mobil1.ca.
 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

05-2020

Imperial Oil

Petroleum and Chemicals Division
Lubricants and Specialties
240 Fourth Ave SW
C. P. 2480, Station M
Calgary AB T2P 3 M 9

1-800-268-3183

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.