Mobil 1™ ESP x2 0W-20
Mobil passenger-vehicle-lube , Switzerland
Product Description
Mobil 1™ ESP x2 0W-20 is an advanced fully synthetic engine oil specifically designed to provide outstanding engine cleanliness, wear protection, strong durability and advanced fuel economy* to keep your engine running like new. Mobil 1™ ESP x2 0W-20 is our latest technology combining durability and protection with a low viscosity, low friction engine oil that was designed in cooperation with key European Original Equipment Manufacturers (OEMs). Mobil 1™ ESP x2 0W-20 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline powered European vehicles that require SAE 0W-20 viscosity grades.
* compared vs Mobil 1 ESP 5W-30.
Features and Benefits
| Features | Advantages and Potential Benefits | 
| Active cleaning agents | Helps to prevent the buildup of harmful deposits to enable long and clean engine life** 
 Provides outstanding engine cleanliness and sludge control | 
| 
 | **Compared to vehicle manufacturer standard | 
| Outstanding thermal and oxidation stability | Helps to reduce oil aging allowing extended drain interval protection | 
| Enhanced frictional properties | Provides up to 4% fuel economy improvement when changing from a higher viscosity 5W-30 engine oil*** | 
| 
 | ***Actual savings are dependent upon vehicle and engine type, outside temperature and barometric pressure, driving conditions and your current engine oil viscosity. | 
| Excellent low temperature capabilities | Quick cold weather performance to help provide fast protection at start-up | 
| Outstanding high temperature capabilities | Provided outstanding high temperature protection over the entire oil drain interval** | 
| 
 | **Compared to vehicle manufacturer standard | 
| Wear protection | Provides outstanding wear protection over the full oil drain interval** | 
| 
 | **Compared to vehicle manufacturer standard | 
Applications
Mobil 1 ESP x2 0W-20 is recommended for the new high-performance gasoline, diesel and hybrid engines found in emerging European vehicles that require SAE 0W-20 viscosity grades.
• Mobil 1 ESP x2 0W-20 can only be used in the vehicles for which it is approved. It is not backward compatible with older vehicle engines.
• Mobil 1 ESP x2 0W-20 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
**** Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications
Specifications and Approvals
| This product has the following approvals: | 
| GM dexosD Licensed | 
| MB-Approval 229.71 | 
| Porsche C20 | 
| VW 508 00 | 
| VW 509 00 | 
| This product meets or exceeds the requirements of: | 
| API SL | 
| ACEA C5 | 
| ACEA C6 | 
| API SN Engine Test Requirements | 
| API SP ENGINE TEST REQUIREMENTS | 
| API SQ Engine Test Requirements | 
Properties and Specifications
| Property | 
 | 
| Grade | SAE 0W-20 | 
| Viscosity Index, ASTM D2270 | 180 | 
| Density, 15.6C, g/cm3, ASTM D4052 | 0.842 | 
| Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 | 8.0 | 
| Hi-Temp Hi-Shear Viscosity @ 150 C, mPa.s, ASTM D4683 | 2.6 | 
| Ash, Sulfated, mass%, ASTM D874 | 0.8 | 
| Flash Point, Cleveland Open Cup, °C, ASTM D92 | 230 | 
| Pour Point, °C, ASTM D97 | -60 | 
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
07-2025