Mobil™ Brake Fluid Class 6
Mobil ancillary , 中国
Product Description
Mobil Brake Fluid CLASS 6 is a high performance low viscosity hydraulic brake fluid, suitable for most modern vehicles , especially those with ABS/EBS/ESP system
Features and Benefits
Mobil Brake Fluid CLASS 6 is a full synthetic borate ester brake fluid that provides high-level brake and clutch performance for ICE and new energy vehicles.
|
Features |
Advantages and Potential Benefits |
|
Excellent performance of low temperature fluidity |
Transfer pressure quickly and response sensitively |
|
High boiling point |
Helps prevent liquids from boiling and causing vapor locks, provide consistent and safe brake performance under severe braking pressure |
|
Long-acting sustained-release formula |
Brings high stability and antioxidant properties, and product performance is always reliable. |
|
Excellent corrosion protection |
Extended life and reliability of brake system components |
|
Wide range application |
Suitable for use in various kinds of ICE and new energy vehicles, espcially thoese with ABS, XBR, TPM, EBL system |
Applications
Mobil Brake Fluid CLASS 6 is recommended by ExxonMobil for use in applications requiring disc, drum and anti-skid braking systems used in average to high performance vehicles requiring CLASS 6, DOT 5.1 , DOT 4 or DOT 3 level performance.
Recommendations for use include:
• Use only in its original form out of a previously unopened or well sealed container
• Always seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this will reduce service life significantly.
• Never reuse drained brake fluid.
• Brake fluid can affect the vehicle paintwork, so remove spills immediately without rubbing.
• Brake fluid should be drained from the vehicle every two years or 40,000 Km (24,000 Miles) and refilled.
• Check Owners Operators Manual for details. And change brake fluid based on the OEM recommendation
• Keep brake fluid clean. Contamination from dust, water or other substances can cause brake failure or increase vehicle repair costs.
• Only store brake fluid in the original container. Keep containers clean and sealed. It is not allowed to add liquid or fill other liquids in the container.
Specifications and Approvals
|
This product meets or exceeds the requirements of: |
|
China GB GB 12981-2012 HZY 6 |
|
SAE J1704 |
|
ISO 4925:2005 Class 6 |
|
FMVSS 116 DOT 4 |
|
FMVSS 116 DOT 5.1 |
Properties and Specifications
|
Property |
|
|
Kinematic viscosity (100℃), mm²/s, GB/T 265 |
1.5-2.5 |
|
Appearance, Visual |
Clear and Bright |
|
Kinematic Viscosity -40 C, mm²/s, GB/T 265 |
Max 700 |
|
ERBP, °C, SH/T 0430 |
Min 265 |
|
Wet ERBP, °C, GB12981 Attachment C |
Min 177 |
|
Color, Visual |
Clourless to faint yellow |
|
Density (at 20 C), Kg/l, SH/T 0068 |
1.065 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
12-2023