Mobil™ Brake Fluid DOT 4 PLUS

Mobil ancillary , 中国

High Performance Hydraulic Brake Fluid

Product Description

Mobil Brake Fluid DOT 4 PLUS is a high performance hydraulic brake fluid , with high equilibrium reflux and wet equilibrium reflux boiling point, for use in automotive disc, drum and anti-skid brake systems and clutch systems.

Features and Benefits

Mobil Brake Fluid DOT 4 PLUS is a full synthetic borate ester brake fluid with high equilibrium reflux and wet equilibrium reflux boiling point. It provides high-level brake and clutch performance in modern as well as older model automotive and commercial vehicles.

Features	Advantages and Potential Benefits
High boiling point	Help prevent liquid from boiling and causing vapor locks, provide consistent and safe brake performance under severe braking pressure
Good performance of low temperature fluidity	Transfer pressure quickly and response sensitively
Excellent corrosion protection	Extended life and reliability of brake system components
Minimum rubber component swell	Reduces leakage and loss of fluid to a minimum

Applications

Mobil Brake Fluid DOT 4 PLUS is recommended by ExxonMobil for use in applications requiring disc, drum and anti-skid braking systems used in average to high performance vehicles requiring DOT 3 or DOT 4 level performance.

Recommendations for use include:

• Use only in its original form out of a previously unopened or well sealed container

• Always seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this will reduce service life significantly.

• Never reuse drained brake fluid.

• Brake fluid can affect the vehicle paintwork, so remove spills immediately without rubbing.

• Brake fluid should be drained from the vehicle every two years or 40,000 Km (24,000 Miles) and refilled.

• Check Owners Operators Manual for details. And change brake fluid based on the OEM recommendation

• Keep brake fluid clean. Contamination from dust, water or other substances can cause brake failure or increase vehicle repair costs.

• Only store brake fluid in the original container. Keep containers clean and sealed. It is not allowed to add liquid or fill other liquids in the container.

Specifications and Approvals

This product meets or exceeds the requirements of:
China GB GB 12981-2012 HZY 4
FMVSS 116 DOT 4
ISO 4925:2005 Class 4
SAE J1704

Properties and Specifications

Property
Appearance, Visual	Clear and Bright
Kinematic Viscosity -40 C, mm²/s, GB/T 265	Max 980
Kinematic viscosity (100℃), mm²/s, GB/T 265	1.5-2.5
ERBP, °C, SH/T 0430	Min 265
Wet ERBP, °C, GB12981 Attachment C	Min 172
Color, Visual	Clourless to faint yellow

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

12-2023

ExxonMobil (China) Investment Co. Ltd
17th Floor, Metro Tower
30 Tian Yao Qiao Road
Shanghai 2000030
China

+86 21 24076000
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.