Mobil EV Cool Drive 043

Mobil passenger-vehicle-lube , 中国

Integrated Electric Motor / Reduction Gearbox Fluid

Product Description

Mobil EV Cool Drive 043 is tailored advanced full synthetic and high energy efficiency fluid for electric vehicle transmission with oil-cooled e-motor integrated with reduction gearbox. Its advanced formulation and combining optimum lubrication characteristics and heat transfer capabilities for use in electric powertrain applications, where thermal management and compatibility with electrical components is equally important as lubrication of critical parts in motion. Outstanding e-motor material compatibility, good Cu corrosion, gear protection and oxidation performance.

Features and Benefits

• High volume resistivity helps minimize the risk of electric short circuits, static discharge, and allows for direct contact with electrical components.
• Extended fluid life through superior thermal-oxidative stability and outstanding resistance against sludge and deposit formation.
• Good Cu corrosion protection and thermal-oxidative stability to maintain system cleanliness over equipment life.
• Outstanding copper and e-motor material compatibility ensure the electrical safety of high voltage EV architecture.
• Superior anti-foam performance that brings outstanding component protection by reducing and eliminating potential of cavitation.
• Excellent cooling performance that greatly dissipate heat from e-motor to lower component temperature, and allows for higher power output.
• Strong gear and bearing hardware protection that secures the EDU running in a good condition.

Applications

Mobil EV Cool Drive 043 is designed for use in electric vehicle reduction gearboxes with and without integrated electric motor, providing gear protection and balancing lubrication performance with cooling properties for electric components.

Properties and Specifications

Property
Pour Point, °C, ASTM D97	-60
Appearance, AMS 1738	C&B
ASTM Color, ASTM D1500	L0.5
FZG A/10/16.6R/90 Load Carrying Capability, FLS, CEC L-084-02	9
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445	14.47
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445	3.5
Flash Point, Cleveland Open Cup, °C, ASTM D92	212
Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983	1800
Density @ 15 C, kg/m3, ASTM D4052	820

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

10-2025

ExxonMobil (China) Investment Co. Ltd
17th Floor, Metro Tower
30 Tian Yao Qiao Road
Shanghai 2000030
China

+86 21 24076000
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.