MOBIL™ FULL SYN FML V 0W20

Mobil passenger-vehicle-lube , 中国

MOBIL™ FULL SYN FML V 0W20 is a full synthetic engine oil.

Product Description

MOBIL™ FULL SYN FML V 0W20 is premium synthetic engine oils, designed to provide high levels of protection and performance.

Features and Benefits

- Suitable for National VI B and below models and highly recommended for Euro Vehicles, for upgrading and protecting the automobile exhaust after-treatment system.

-Helps clean and reduce various deposits formed by frequent engine start-stop.

- Under high temperature and high speed conditions, helps the engine oil maintain good fluidity and effectively resists high temperature oxidation.

- The fully synthetic formula brings excellent low temperature fluidity, and low temperature starting is smoother.

Applications

We particularly recommend MOBIL™ FULL SYN FML V 0W20 if you regularly experience demanding conditions where it can help combat the damage caused by frequent high engine stress:

• Nearly all engine technologies

• Gasoline and Diesel

• Passenger cars, SUV's, light trucks and vans

• Highway cruising and stop and go city driving

• Normal to frequently severe operating conditions

• Turbo-Chargers and Direct Injection engines

• High Performance Engines

Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle.

Specifications and Approvals

This product has the following approvals:
VW 508 00
VW 509 00

This product meets or exceeds the requirements of:
ACEA C5
ACEA C6
ILSAC GF-6A
API SN PLUS
API SP

Properties and Specifications

Property
Grade	SAE 0W-20
Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684	23700
Viscosity Index, ASTM D2270	178
Pour Point, °C, ASTM D97	-45
Ash, Sulfated, mass%, ASTM D874	0.8
Total Base Number, mgKOH/g, ASTM D2896	9.4
Density @ 15 C, g/ml, ASTM D1298	0.842
Flash Point, Cleveland Open Cup, °C, ASTM D92	236
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683	2.6
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445	8.1
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445	41

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

06-2025

ExxonMobil (China) Investment Co. Ltd
17th Floor, Metro Tower
30 Tian Yao Qiao Road
Shanghai 2000030
China

+86 21 24076000
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.