Mobil 1™ FS X2 5W-40

Mobil passenger-vehicle-lube , 中国

Advanced Full Synthetic Motor Oil

Product Description

Mobil 1™ FS X2 5W-40 is an advanced full synthetic motor oil engineered for the latest gasoline and diesel engine technology (without GPFs and DPFs) delivering excellent all-around performance. It provides exceptional cleaning power, wear protection and overall performance.

 

Features and Benefits

 

Features

Advantages and Potential Benefits

Outstanding thermal and oxidation stability

Helps to resist oil aging allowing extended drain interval protection

Excellent low temperature capabilities

Outstanding cold starting and fast lubrication to protect against wear

Active cleaning agents

Designed to clean up sludge left behind in your engine

High viscosity index

Excellent overall lubrication and wear protection performance for many driving styles and conditions, from mild to severe

 

Applications

Mobil 1™ FS X2 5W-40 is recommended by ExxonMobil for all types of vehicles, including high-performance turbo-charged, supercharged gasoline and certain diesel multi-valve fuel injected engines found in passenger cars, SUVs, light vans and trucks (without GPFs and DPFs).

 

• Mobil 1™ FS X2 5W-40 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.

 

Always check your owner's manual for the manufacturer's recommended oil viscosity grade, API service classification and any builder approval.

 

Specifications and Approvals

 

This product has the following approvals:

BMW Longlife 01

MB-Approval 229.3

RENAULT RN0700

RENAULT RN0710

VW 502 00

VW 505 00

Porsche A40

 

This product meets or exceeds the requirements of:

API SM

API SN

API SN PLUS

API SP

ACEA A3/B3

ACEA A3/B4

Fiat 9.55535-M2

 

Properties and Specifications

Property

 

Grade

SAE 5W-40

Viscosity Index, ASTM D2270

170

Density @ 15.6 C, g/ml, ASTM D4052

0.841

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

13.2

Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683

3.7

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

81

Flash Point, Cleveland Open Cup, °C, ASTM D92

241

Ash, Sulfated, mass%, ASTM D874

1.1

Total Base Number, mgKOH/g, ASTM D2896

12.5

Pour Point, °C, ASTM D97

-40

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

09-2022

ExxonMobil (China) Investment Co. Ltd
17th Floor, Metro Tower
30 Tian Yao Qiao Road
Shanghai 2000030
China

+86 21 24076000
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com 
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.