MOBIL ATF 6HV
Mobil passenger-vehicle-lube , 中国
Product Description
Mobil ATF 6HV is a premium full synthetic lubricant formulated for use in a wide variety of North American, European, and Asian vehicles equipped with 6 speed step automatic transmissions.
Features and Benefits
• Exceptional oxidation stability and enhanced elastomer compatibility — maintains long-lasting fluid quality and helps prolong transmission life
• Corrosion prevention – helps provide protection against rusting and corrosion, plus special protection for soldered fittings
• Low temperature fluidity for smooth start-up, plus exceptional viscosity stability at high operating temperatures
• Excellent lubricating characteristics for quiet operation, smooth shifting, and uncompromised anti-wear protection
Applications
Mobil ATF 6HV is a full synthetic automatic transmission fluid designed to meet the needs of the broadest range of transmission designs. Mobil ATF 6HV is not recommended for use in CVT or DCT transmissions.
Good maintenance practice dictates that automatic transmissions be checked for proper fluid levels at regular intervals, and that the fluid be drained and replaced at intervals recommended by the manufacturer. Some manufacturers recommend more frequent changes of transmission fluid under severe driving conditions such as those that occur in heavy traffic, in hot weather, or when pulling a trailer.
Based on a combination of field-testing and laboratory testing, Mobil ATF 6HV is suitable for use in applications requiring JASO 1A, Dexron IIIH, Ford Mercon V, etc.
Mobil ATF 6HV is suitable for use in a broad range of transmissions. The list below is just a sample of applications where combined test results support the use of Mobil ATF 6HV. It is important to note that the respective vehicle manufacturers have neither evaluated nor approved Multi-vehicle ATF in these applications except where noted in the Specifications and Approvals section.
Mobil ATF 6HV is suitable for use in many passenger vehicles including:
• Audi
• BMW
• Chrysler
• Ford
• GM
• Honda
• Hyundai
• Kia
• Mazda
• Mitsubishi
• Nissan
• Subaru
• Suzuki
• Toyota
• Volvo cars
• VW
Specifications and Approvals
This product is recommended for use in applications requiring: |
AUDI TL 52162 |
AUDI TL 52990 |
AUDI TL 55025-A |
BMW 83 22 0 026 922 |
BMW 83 22 7 542 290 |
BMW 83 22 9 407 807 |
CHRYSLER ATF+2 |
CHRYSLER ATF+3 |
CHRYSLER MS-1872 |
CHRYSLER MS-5931 |
CHRYSLER SP-IV ATF |
FORD Mercon V |
GM Dexron IID Application Suitable |
GM DEXRON III G |
GM DEXRON III H |
Honda ATF-Z1 |
Hyundai SP-III |
Mazda M-III |
Mazda M-V |
Mitsubishi SP-II |
Mitsubishi SP-III |
NISSAN Matic C |
NISSAN Matic D |
NISSAN Matic J |
NISSAN Matic K |
PORSCHE 000.043.204.63 |
PORSCHE 000.043.205.28 |
Subaru ATF |
Suzuki 3314 |
Suzuki 3317 |
TOYOTA PSF Type EH |
TOYOTA T-III |
TOYOTA T-IV |
VOLVO 1161521 |
VOLVO 1161540 |
VOLVO 1161621 |
VOLVO 1161640 |
ZF TE-ML 03D |
ZF TE-ML 04D |
ZF TE-ML 05L |
ZF TE-ML 09 |
ZF TE-ML 11 (3, 4, & 5 speeds) |
ZF TE-ML 14A |
ZF TE-ML 16L |
ZF TE-ML 17C |
ZF TE-ML 21L |
This product meets or exceeds the requirements of: |
JASO 1-A |
Properties and Specifications
Property |
|
Kinematic Viscosity 40 C, cSt, ASTM D445 |
37 |
Pour Point, °C, ASTM D5950 |
-45 |
Color, Visual |
Amber |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
228 |
Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983 |
17500 |
Kinematic Viscosity 100 C, cSt, ASTM D445 |
7 |
Density @ 15 C, g/cm3, ASTM D4052 |
0.851 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
07-2020