Mobil™ DCT Fluid
Mobil passenger-vehicle-lube , 中国
Product Description
Mobil™ Wet Dual Clutch Transmission Fluid (DCTF) is a premium fully synthetic fluid developed to service wet dual clutch transmissions in a broad range of North American, European, and Asian vehicles.
Features and Benefits
Wide Application
Widely applicable to wet dual clutch transmissions across a broad range of vehicle models.
Smooth Shifting
Responsive shift control technology delivers quick, precise gear changes for a smooth and stable driving experience.
Excellent Low-Temperature Fluidity
Low temperature fluidity for smooth start-up, plus exceptional viscosity stability at high operating temperatures
Wear Protection
A well-balanced protective formulation provides long-lasting, exceptional anti-wear protection for transmission components.
Rust & Corrosion Protection
Offers effective rust and corrosion resistance, providing special protection for transmission hardware and metal parts.
Applications
Mobil™ DCT Fluid is a premium, fully synthetic DCT fluid designed to meet the requirements of a wide range of wet dual clutch transmissions designs. It is not recommended for use in automatic transmissions (AT) or continuously variable transmission (CVT).
Good maintenance practice dictates that automatic transmissions be checked for proper fluid levels at regular intervals, and that the fluid be drained and replaced at intervals recommended by the manufacturer. Some manufacturers recommend more frequent changes of transmission fluid under severe driving conditions such as those that occur in heavy traffic, in hot weather, or when pulling a trailer.
Based on a combination of field-testing and laboratory testing, Mobil DCT Fluid is suitable for the service of wet dual clutch transmissions used in vehicles from Audi, Volkswagen, Ford, Volvo, and other brands.
Mobil DCT Fluid is suitable for use in a broad range of transmissions. The list below is just a sample of applications where combined test results support the use of Mobil DCT Fluid. It is important to note that the respective vehicle manufacturers have neither evaluated nor approved in these applications except where noted in the Specifications and Approvals section.
Mobil DCT Fluid is recommended for use in many passenger vehicles including but not limited to:
• Audi
• BMW
• Chrysler
• Fiat
• Ford
• MB
• Mitsubishi
• Porsche
• Renault
• SAIC-GM
• VW
• Volve
Properties and Specifications
|
Property |
|
|
Grade |
SAE Others |
|
Kinematic Viscosity 40 C, cSt, ASTM D445 |
38.5 |
|
Pour Point, °C, ASTM D5950 |
-45 |
|
Density @ 15.6 C, g/ml, ASTM D4052 |
0.843 |
|
Kinematic Viscosity 100 C, cSt, ASTM D445 |
7.1 |
|
Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983 |
10200 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
222 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
07-2026