Mobil 1™ ESP Formula 0W-40
Mobil passenger-vehicle-lube , Colombia
Product Description
Mobil 1™ ESP Formula 0W-40 is a fully synthetic engine oil designed to help provide exceptional cleaning power, wear protection and overall performance. Mobil 1 ESP Formula 0W-40 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in both diesel and gasoline powered automobiles.
Features and Benefits
Mobil 1 ESP Formula 0W-40 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF's) and Gasoline Catalytic Converters (CAT's). Mobil 1 ESP Formula 0W-40 has been designed to help deliver outstanding performance and protection in conjunction with potential fuel economy benefits. Key features and potential benefits include:
Features |
Advantages and Potential Benefits |
Low Ash Content |
Helps to reduce particulate build up in Diesel Particulate Filters |
Low Sulphur and Phosphorous content |
Helps to reduce poisoning of Gasoline Catalytic Converters |
Active cleaning agents |
Helps to reduce deposits and sludge build-up to enable long and clean engine life |
Outstanding thermal and oxidation stability |
Helps to reduce oil aging allowing extended drain interval protection |
Low oil consumption |
Less hydrocarbon pollution |
Enhanced frictional properties |
Potentially aids fuel economy |
Excellent low temperature capabilities |
Quick cold weather starting and ultra fast protection Helps to extend engine life |
Applications
Mobil 1 ESP Formula 0W-40 has the General Motors Service Fill dexos2™ approval, which is required for all 2010 and onward new GM/Opel/Vauxhall/Chevrolet Diesel and Gasoline models. GM/Opel have advised that dexos2™ specification is backward compatible to older GM/Opel specifications (GM-LL-A-025 and GM-LL-B-025). The majority of GM/Opel/Vauxhall/Chevrolet Diesel and Gasoline vehicles can use dexos2™ lubricants.
Mobil 1 ESP Formula 0W-40 is especially suitable for extreme conditions, where conventional oil often may not perform.
It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Specifications and Approvals
This product has the following builder approvals: |
GM dexos2 (license number D20679HJ015) |
Properties and Specifications
Property |
|
Grade |
SAE 0W-40 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
69 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
12.9 |
Ash, Sulfated, mass%, ASTM D874 |
0.8 |
Phosphorus, mass%, ASTM D4951 |
0.09 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
232 |
Density @ 15 C, g/ml, ASTM D4052 |
0.8408 |
Total Base Number, mgKOH/g, ASTM D2896 |
8.5 |
Mini-Rotary Viscometer, Yield Stress, -40 C, Pa, ASTM D4684 |
20100 |
Viscosity Index, ASTM D2270 |
189 |
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
3.53 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
11-2020