Mobil Pegasus™ 505
Mobil industrial , Egypt
Gas Engine Oil
Mobil Pegasus™ 505 is a premium quality gas engine oil primarily intended for the lubrication of crankcase and power and compression cylinders of spark-ignited, two-stroke and four-stroke gas-fuelled engines. It is formulated from high quality mineral oils and an advanced additive system to provide a high level of chemical stability and resistance to oxidation. This, together with its very effective detergency and dispersancy means that the formation of carbon and ash deposits that can cause detonation is negligible. Its excellent anti-corrosion properties prevent corrosive wear in cylinders and bearings. Mobil Pegasus 505 minimizes the wear of rings, liners and bearings, and curtails valve seat wear in turbo-charged four cycle engines. It provides superior engine cleanliness and filter life and extends the periods between engine overhauls. Its high Viscosity Index and low temperature fluidity ensure effective lubrication at high operating temperatures and low starting temperatures. Mobil Pegasus 505 is field proven and approved by all major builders of natural gas engines.
Features and Benefits
Mobil Pegasus 505 gas engine oil provides cleaner engines, lower wear rates and improved engine performance. The result is the potential for reduced maintenance costs and improved production capacity. Its good chemical and oxidation stability allows for extended drain intervals and filter cost reduction.
- Clean engines, with extended engine life and reduced overhaul costs
- Long oil, filter and spark plug life with low oil consumption
- Excellent thermal stability and resistance to cooking
- Minimum power loss caused by varnish and sludge
- Freedom from combustion chamber deposits and consequent power loss
- Reduced port blockage with longer intervals between cleanings
- Improved lubrication at high operating temperatures and low starting temperatures
Mobil Pegasus 505 is recommended for the lubrication of the crankcase and power and compression cylinders of spark-ignited two-stroke and four-stroke cycle gas-fuelled engines. It meets the special requirements of the most modern, high-specific-output or ambient-rated turbo-charged engines operating at, or in excess of, the rated capacity under high temperatures and high altitudes. It also meets the requirements of slow-speed, two-cycle and four-cycle engines operating under normal service conditions.
|Mobil Pegasus 505||Test Method||Unit|
|Appearance||Visual||Bright and Clear|
|40ºC||ASTM D 445||cSt||126|
|100ºC||ASTM D 445||cSt||13.1|
|Viscosity Index||ASTM D 2270||none||97|
|Flash Point COC||ASTM D 92||ºC||238|
|Pour Point||ASTM D 97||ºC||-15|
|Total Base Number||ASTM D 2896||mg KOH/g||2.7|
|Sulfated Ash||ASTM D 874||wt%||0.5|
|Calcium||ASTM D 4951||wt%||0.12|
|Zinc||ASTM D 4951||wt%||0.025|
|Foam Seq I, Tend/Stab||ASTM D 892||ml/ml||0/0|
|Foam Seq II, Tend/Stab||ASTM D 892||ml/ml||10/0|
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design and Pegasus 505 are trademarks of ExxonMobil Corporation, or one of its subsidiaries.09-2019