Mobil 1™ Formula H 0W-40
Mobil passenger-vehicle-lube , Egypt
Product Description
Mobil 1TM Formula H 0W-40 Advanced Full Synthetic Motor Oil is engineered for the latest Honda gasoline and diesel (without Diesel Particulate Filters or DPFs) engine technology delivering excellent all-round performance. It provides exceptional cleaning power, wear protection and overall performance.
Features and Benefits
Features |
Advantages and Potential Benefits |
Broad application |
Meets or exceeds many OEM and industry approvals |
Advanced full synthetic formulation |
Excellent overall lubrication and wear protection |
Excellent low temperature capabilities |
Rapid engine protection at start-up to reduce engine wear |
Active cleaning agents |
Help keep your engine run clean |
Outstanding high temperature thermal and oxidative stability |
Resists oil breakdown to provide long lasting protection |
Applications
Mobil 1TM Formula H 0W-40 is recommended for many types of modern vehicles where it will help provide unsurpassed performance under very demanding driving conditions, including:
• Latest engine technologies including Turbo-chargers, Direct Injection, Diesels and Hybrids
• High Performance Engines
• Helps to extend Oil Drain
• Nearly all operating conditions, from mild to extreme
Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle.
Specifications and Approvals
This product is recommended for use in applications requiring: |
API CF |
FIAT FIAT 9.55535-M2 |
This product meets or exceeds the requirements of: |
ACEA A3/B3 |
API SL |
API SM |
API SN |
ACEA A3/B3-16 |
FIAT 9.55535-M2 |
FORD WSS-M2C937-A |
Properties and Specifications
Property |
|
Grade |
SAE 0W-40 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
12.9 |
Phosphorus, mass%, ASTM D4951 |
0.1 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
226 |
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
3.6 |
Ash, Sulfated, mass%, ASTM D874 |
1.34 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
70.8 |
Density @ 15 C, g/cm3, ASTM D4052 |
0.846 |
Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684 |
21600 |
Pour Point, °C, ASTM D97 |
-60 |
Total Base Number, mgKOH/g, ASTM D2896 |
12.6 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
10-2022