Mobil Super™ 3000 Formula V 0W-20
Mobil passenger-vehicle-lube , Finland
Product Description
Mobil Super™ 3000 engine oil series are synthetic, and engineered to deliver outstanding protection.
Mobil Super™ 3000 Formula V 0W-20 is a high performance grade engine oil formulated to provide long engine life for modern gasoline and diesel vehicles equipped with After Treatment Systems (e.g. DPF) and requiring a low viscosity oil to achieve enhanced fuel economy.
Features and Benefits
Mobil Super 3000 Formula V 0W-20 is designed to help :
- improve fuel economy in both diesel and gasoline powered engines
- enhance engine cleanliness and sludge prevention
- enhance high temperature and wear protection
- enhance cold start-up performance
Applications
Mobil Super 3000 Formula V 0W-20 is suitable for modern high efficiency gasoline, diesel and hybrid cars from Volkswagen as well as for Japanese and Korean vehicles that specifically call for a SAE 0W-20 viscosity grade and any of the specifications the oil supports.
• Mobil Super 3000 Formula V 0W-20 meets or exceeds the requirements of API SN Plus industry standard to help address LSPI (Low Speed Pre-Ignition) in downsized direct injection turbocharged gasoline engines.
• Mobil Super 3000 Formula V 0W-20 is not recommended for older vehicle engines designed to operate with higher viscosity engine oils.
Owner's manual should be consulted for recommended viscosity grade and specification.
Specifications and Approvals
| 
             This product has the following approvals:  | 
        
| 
             VW 508 00  | 
        
| 
             VW 509 00  | 
        
| 
             Porsche C20  | 
        
| 
             This product meets or exceeds the requirements of:  | 
        
| 
             ACEA C5  | 
        
| 
             API SN PLUS  | 
        
Properties and Specifications
| 
             Property  | 
            
             
  | 
        
| 
             Grade  | 
            
             SAE 0W-20  | 
        
| 
             Kinematic Viscosity @ 100 C, mm2/s, ASTM D445  | 
            
             8.1  | 
        
| 
             Kinematic Viscosity @ 40 C, mm2/s, ASTM D445  | 
            
             41.4  | 
        
| 
             Pour Point, °C, ASTM D97  | 
            
             -45  | 
        
| 
             Phosphorus, mass%, ASTM D4951  | 
            
             0.08  | 
        
| 
             Flash Point, Cleveland Open Cup, °C, ASTM D92  | 
            
             236  | 
        
| 
             Density @ 15 C, g/ml, ASTM D1298  | 
            
             0.842  | 
        
| 
             Ash, Sulfated, mass%, ASTM D874  | 
            
             0.8  | 
        
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
03-2025