Mobil Super™ 3000 X1 FORMULA FE 5W-30
Mobil passenger-vehicle-lube , Fiji
Product Description
Mobil Super™ 3000 engine oil series are synthetic and engineered to deliver outstanding protection.
Mobil Super™ 3000 x1 Formula FE 5W-30 provides long engine life with enhanced protection over a wide temperature range for many types and ages of vehicles including passenger cars, light commercial vehicles and vans.
Features and Benefits
Mobil Super™ 3000 x1 Formula FE 5W-30 provides:
• Enhanced high temperature protection
• Enhanced cold start-up performance
• Enhanced engine cleanliness and sludge prevention
• Enhanced wear protection
• Helps fuel economy (as per ACEA A5/B5)
• Suitable for use in both gasoline and diesel engine passenger cars, light commercial vehicles and vans.
Applications
Mobil Super 3000 x1 Formula FE 5W-30 is recommended if you regularly experience demanding conditions where it can help combat the damage caused by frequent high engine stress.
• Mobil Super 3000 x1 Formula FE 5W-30 can be used in a variety of gasoline and diesel automobiles, light trucks and vans designed for use of a low viscosity (HTHS) motor oil.
• Mobil Super 3000 x1 Formula FE 5W-30 is intended primarily to meet the requirements of Ford in all engines requiring WSS-M2C913-D/C but is also suitable for use in Jaguar & Land Rover vehicles calling for STJLR.03.5003.
Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle.
Specifications and Approvals
|
This product has the following approvals: |
|
Ford WSS-M2C913-D |
|
This product is recommended for use in applications requiring: |
|
API CF |
|
This product meets or exceeds the requirements of: |
|
API SL |
|
API SN Engine Test Requirements |
|
Ford WSS-M2C913-C |
|
ACEA A5/B5 |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 5W-30 |
|
Ash, Sulfated, mass%, ASTM D874 |
1.1 |
|
Density @ 15 C, g/ml, ASTM D4052 |
0.85 |
|
Flash Point, °C, ASTM D92 |
222 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
9.8 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
53 |
|
Phosphorus, mass%, ASTM D4951 |
0.09 |
|
Pour Point, °C, ASTM D97 |
-39 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
04-2024