Mobil Delvac MX™ 10W-30

Mobil commercial-vehicle-lube , Hong Kong

High Performance Diesel Engine Oil

Product Description

Mobil Delvac MX™ 10W-30 is formulated to deliver high performance in modern multipurpose, high performance diesel and gasoline medium duty commercial vehicle as well as heavy duty commercial vehicle, including turbo-charged and intercooled units.

 

Features and Benefits

High output, low emission diesel engines significantly increase the demands on engine lubricants. Tighter engine designs reduce oil consumption, resulting in less fresh oil make-up to replenish depleted additives. Top piston fire rings are located higher on the piston bringing the oil film closer to the combustion chamber where higher temperatures increase thermal stress on the lubricant. Increased fuel injector pressure and retarded timing improve fuel burn efficiency, but also increase engine temperatures and increase soot loads. Mobil Delvac MX 10W-30 is formulated from high performance base oils and a balanced additive system to provide optimum engine performance in modern diesel and gasoline engines as well as older models. The key benefits include:

 

Features

Advantages and Potential Benefits

High thermal and oxidation stability

Reduced sludge build-up, deposits and viscosity increase

TBN reserves

Deposit control and acid neutralisation

Stay-in-grade shear stability

Wear protection and viscosity control

High detergency/dispersancy

Clean engines and long component life

Improved soot handling

Improved viscosity control and used oil pumpability

Excellent low temperature properties

Start-up wear protection

Component compatibility

Long gasket and seal life

 

Applications

Recommended by ExxonMobil for use in:

 

     •  Naturally aspirated and turbo-charged diesel powered equipment

 

     •  On-highway medium and heavy duty trucking

 

     •  Off-highway industries including: construction, mining, quarrying, and agriculture

 

     •  Mixed fleet applications

Specifications and Approvals

This product meets or exceeds the requirements of:

API CI-4

API SL

 

Properties and Specifications

Property

 

Grade

SAE 10W-30

Viscosity Index, ASTM D2270

141

Pour Point, °C, ASTM D97

-36

Ash, Sulfated, mass%, ASTM D874

1.1

Density @ 15 C, kg/l, ASTM D4052

0.867

Flash Point, Cleveland Open Cup, °C, ASTM D92

225

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

11.7

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

79.5

Total Base Number, mgKOH/g, ASTM D2896

9

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

08-2021

ExxonMobil Hong Kong
22nd Floor, Central Plaza,
18 Harbour Road, Wanchai
Hong Kong

+852 3197 8888
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com 
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.