Mobil Super™ All-In-One Protection 5W-30

Mobil passenger-vehicle-lube , Indonesia

Full Synthetic Engine Oil

Product Description

Mobil Super™ All-In-One Protection 5W-30 is brought to you by the makers of Mobil 1. This full synthetic engine oil is tailored to deliver improved fuel economy by up to 5%** and provides outstanding engine wear protection even under the most demanding driving conditions.

Mobil Super™ All-In-One Protection 5W-30 is formulated with Heat Activated Anti-Wear™ molecules technology, which provides excellent engine protection and proven to provide engine protection for 20 years*
Mobil Super™ All-In-One Protection 5W-30 is proven during API SQ engines test to reduce damaging Low Speed Pre-Ignition (LSPI) problem in modern engines. This helps to improve engine efficiencies and prolong engine life.

Features and Benefits

• Suitable for Japanese, Asian, European, American, petrol, diesel, and hybrid engines.
• Heat Activated Anti-Wear™ molecules technology provides high temperature wear protection, while keeping your engine clean.
• Proven engine protection for 20 years*
• 5% improvement in fuel economy performance**
• Fight sludge with active cleaning agents***

* Based on field trial in USA under controlled test conditions with routine oil change. 20 years is based on annual driving distance 14,850 km. Performance may vary depending on the engine design, fuel, temperature and actual driving conditions.

** Based on Sequence VIE test result vs. API SQ engine test requirement. Performance may vary depending on the engine design, temperature and actual driving conditions.

*** Based on passing Sequence VH engine test.

Applications

Mobil Super™ All-In-One Protection 5W-30 is formulated for petrol engines, including SUVs, MPVs, and Hybrid cars, where API SQ/SP and SAE 5W-30 viscosity grade is recommended. It is also recommended for diesel engine application requiring 5W-30 viscosity and API CF specification.

Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle.

Specifications and Approvals

This product is recommended for use in applications requiring:
API CF

This product meets or exceeds the requirements of:
ILSAC GF-6A
API SP Resource Conserving
API SP
API SN PLUS
API SN
API SQ
API SQ Resource Conserving
ILSAC GF-7A
FORD WSS-M2C971-A1

Properties and Specifications

Property
Grade	SAE 5W-30
Mini-Rotary Viscometer, Apparent Viscosity, -35 C, mPa.s, ASTM D4684	17500
Density @ 15.6 C, g/ml, ASTM D4052	0.857
Pour Point, °C, ASTM D97	-39
Total Base Number, mgKOH/g, ASTM D2896	7.3
Ash, Sulfated, mass%, ASTM D874	0.7
Flash Point, Cleveland Open Cup, °C, ASTM D92	236
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445	62
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683	3
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445	10.2
Viscosity Index, ASTM D2270	153

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

10-2025

ExxonMobil Asia Pacific Pte Ltd
Jakarta Representative Office
Wisma GKBI 27th Floor
Jl. Jenderal Sudirman No. 28
Jakarta 10210
Indonesia

+62 21 574 0707
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.