Mobil 1™ FS X2 5W-40
Mobil passenger-vehicle-lube , Cambodia
Product Description
Mobil 1™ FS X2 5W-40 European Car Formula is an advanced full synthetic motor oil engineered for the latest gasoline and diesel (without DPFs) engine technology delivering excellent all-around performance. It provides exceptional cleaning power, wear protection and overall performance.
Features and Benefits
Mobil 1™ FS X2 5W-40 is made with a proprietary blend of ultra-high performance synthetic basestocks fortified with a precisely balanced component system.
Features |
Advantages and Potential Benefits |
Outstanding thermal and oxidation stability |
Helps to resist oil aging allowing extended drain interval protection |
Excellent low temperature capabilities |
Outstanding cold starting and fast lubrication to protect against wear |
Active cleaning agents |
Designed to clean up sludge left behind in your engine |
Low oil volatility |
Helps reduce oil consumption |
High viscosity index |
Excellent overall lubrication and wear protection performance for many driving styles and conditions, from mild to severe |
Applications
Mobil 1™ FS X2 5W-40 is recommended by ExxonMobil for all types of vehicles, including high-performance turbo-charged, supercharged gasoline and certain diesel multi-valve fuel injected engines found in passenger cars, SUVs, light vans and trucks.
• Mobil 1™ FS X2 5W-40 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Always check your owner's manual for the manufacturer's recommended oil viscosity grade, API service classification and any builder approval.
Specifications and Approvals
This product has the following approvals: |
MB-Approval 229.3 |
VW 502 00 |
VW 505 00 |
RENAULT RN0700 |
RENAULT RN0710 |
This product is recommended for use in applications requiring: |
ACEA A3/B3-16 |
This product meets or exceeds the requirements of: |
API SJ |
API SL |
API SM |
API SN |
ACEA A3/B4 |
Fiat 9.55535-M2 |
Properties and Specifications
Property |
|
Grade |
SAE 5W-40 |
Pour Point, °C, ASTM D97 |
-40 |
Total Base Number, mgKOH/g, ASTM D2896 |
12.5 |
Ash, Sulfated, mass%, ASTM D874 |
1.1 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
241 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
81 |
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
3.7 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
13.2 |
Density @ 15.6 C, g/ml, ASTM D4052 |
0.841 |
Viscosity Index, ASTM D2270 |
170 |
Mini-Rotary Viscometer, Apparent Viscosity, -35 C, mPa.s, ASTM D4684 |
22000 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
09-2024