Mobil Super™ All-In-One Protection 0W-20
Mobil passenger-vehicle-lube , Cambodia
Product Description
Mobil Super™ All-In-One Protection 0W-20 is brought to you by the makers of Mobil 1. This full synthetic engine oil is tailored to deliver improved fuel economy by up to 2%** and provides outstanding engine wear protection even under the most demanding driving conditions.
Mobil Super™ All-In-One Protection 0W-20 is formulated with Heat Activated Anti-Wear™ molecules technology which provides superior engine protection under high temperature and proven in latest API SP engine test to provides better engine wear protection up to 65%*.
Mobil Super™ All-In-One Protection 0W-20 is proven during API SP engines test to reduce damaging Low Speed Pre-Ignition (LSPI) problem in modern engines. This helps to improve engine efficiencies and prolong engine life.
Features and Benefits
• Suitable for Toyota, Honda, Nissan, hybrid and other newer Japanese ECO gasoline engines
• Improved fuel economy by up to 2%**
• Heat Activated Anti-Wear™ molecules technology provides high temperature wear protection while keeping your engine clean
• Provides better engine wear protection up to 65%*
* Based on Sequence IVB (Iron Wear) test result versus API SP engine test requirement. Result varies subject to engine, temperature and actual driving conditions.
** Based on Sequence VIE test result versus API SP industry reference oil. Result varies subject to engine, temperature and actual driving conditions.
Applications
Mobil Super™ All-In-One Protection 0W-20 is recommended for gasoline fueled latest Japanese and Korean engines, especially for Hybrid and ECO cars where SAE 0W-20 viscosity grade is recommended.
Specifications and Approvals
This product meets or exceeds the requirements of: |
ILSAC GF-6A |
API SJ |
API SL |
API SM |
API SN |
API SN PLUS |
API SP |
Ford WSS-M2C947-A |
Ford WSS-M2C947-B1 |
FORD WSS-M2C962-A1 |
Properties and Specifications
Property |
|
Grade |
SAE 0W-20 |
Ash, Sulfated, mass%, ASTM D874 |
0.8 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
45 |
Density @ 15.6 C, g/ml, ASTM D4052 |
0.847 |
Total Base Number, mgKOH/g, ASTM D2896 |
7.5 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
220 |
Pour Point, °C, ASTM D97 |
-42 |
Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684 |
24700 |
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
2.6 |
Viscosity Index, ASTM D2270 |
170 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
8.5 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
04-2024