Mobil Delvac Legend™ 10W-40 Protection
Mobil commercial-vehicle-lube , South Korea
Product Description
Mobil Delvac Legend™ 10W-40 Protection is a synthetic technology extra high performance diesel engine oil that helps extend engine life on and off-highway applications while delivering outstanding performance in modern, high-output, low-emission engines including those with Diesel Particulate Filters (DPFs), Selective Catalytic Reduction (SCR), Continuously Regenerating Traps (CRT), Diesel Oxidation Catalysts (DOC) and Exhaust Gas Recirculation (EGR).
Features and Benefits
Mobil Delvac Legend™ 10W-40 Protection is formulated with optimized base oil and additive technology to provide a strong foundation for oxidation resistance, soot handing and wear control to help long engine life and extend drain intervals.
Features |
Advantages and Potential Benefits |
Enhanced soot-viscosity control |
Helps to maintain engine efficiency, long engine life and long oil life |
Outstanding thermal and oxidative stability |
Helps to reduce low temperature sludge build-up and high temperature deposits |
TBN reserves |
Helps to improve corrosion protection and to extend drain intervals |
Stay-in-grade shear stability |
Helps to maintain viscosity in severe, high temperature service for greater wear protection and long engine life |
Outstanding resistance to corrosive and abrasive wear |
Long life of critical wear surfaces |
Component compatibility |
Long gasket, seal and after treatment device (DPF and DOC) life |
Applications
Recommended by ExxonMobil for use in:
• Heavy duty diesel engines including Euro V/VI modern low emissions vehicles(1) , utilizing technologies such as Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR), Continuously Regenerating Traps (CRT), Diesel Oxidation Catalysts (DOC) and Exhaust Gas Recirculation (EGR)
• On-highway light and heavy-duty trucking
• Off-highway industries including construction, mining, quarrying, and agriculture.
(1) For detailed lubes requirement and application, please refer to the vehicle service manual
Specifications and Approvals
This product meets or exceeds the requirements of: |
API CK-4 |
Properties and Specifications
Property |
|
Grade |
SAE 10W-40 |
Viscosity Index, ASTM D2270 |
152 |
Total Base Number, mgKOH/g, ASTM D2896 |
10 |
Pour Point, °C, ASTM D97 |
-36 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
97.69 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
14.36 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
232 |
Ash, Sulfated, mass%, ASTM D874 |
0.94 |
Density @ 15 C, g/ml, ASTM D1298 |
0.8686 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
11-2023