Mobil 1™ ESP X2 0W-20

Mobil passenger-vehicle-lube , South Korea

Advanced Fuel Economy, Advanced full synthetic engine oil

Product Description

Mobil 1™ ESP x2 0W-20 is an advanced full synthetic engine oil specifically designed to provide outstanding engine cleanliness, wear protection, strong durability and advanced fuel economy* to keep your engine running like new.  Mobil 1 ESP x2 0W-20 is our latest technology combining durability and protection with a low viscosity, low friction engine oil that was designed in cooperation with key European Original Equipment Manufacturers (OEMs). Mobil 1 ESP x2 0W-20 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline powered European vehicles that require SAE 0W-20 viscosity grades.

* compared vs Mobil 1 ESP Formula 5W-30.

 

Features and Benefits

 

Features

Advantages and Potential Benefits

Active cleaning agents

Helps to prevent the buildup of harmful deposits to enable long and clean engine life**

 

Provides outstanding engine cleanliness and sludge control.

Outstanding thermal and oxidation stability

Helps to reduce oil aging allowing extended drain interval protection

Enhanced frictional properties

Helps to reduce oil aging allowing extended drain interval protection

Enhanced frictional properties

Provides up to 4% fuel economy improvement versus Mobil 1 ESP Formula 5W-30***

***Savings would be based on switching from a higher viscosity motor oil, similar to Mobil 1 ESP Formula 5W-30, to a 0W-20 viscosity grade. Actual savings are dependent upon vehicle and engine type, outside temperature and barometric pressure, driving conditions and your current engine oil viscosity.

Excellent low temperature capabilities

Quick cold weather performance to help provide fast protection at start-up

Outstanding high temperature capabilities

 

Wear protection

Provided outstanding high temperature protection over the entire oil drain interval**

Wear protection

Provides outstanding wear protection over the full oil drain interval**

**Compared to vehicle manufacturer standard

 

Applications

Mobil 1 ESP x2 0W-20 is recommended for the new high-performance gasoline and diesel engines found in emerging European vehicles that require SAE 0W-20 viscosity grades, or China 6 vehicles that has GPF (gasoline particulate filter) / DPF (diesel particulate filter)

     •  Mobil 1 ESP x2 0W-20 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.

**** Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications

 

Specifications and Approvals

This product has the following approvals:

GM dexosD Licensed

Porsche C20

MB-Approval 229.71

VW 508 00

VW 509 00

 

This product meets or exceeds the requirements of:

API SL

ACEA C5

API SN Engine Test Requirements

API SN PLUS ENGINE TEST REQUIREMENTS

API SP ENGINE TEST REQUIREMENTS

 

Properties and Specifications

Property

Grade

SAE 0W-20

Ash, Sulfated, mass%, ASTM D874

0.8

Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684

10000

Viscosity Index, ASTM D2270

175

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

7.9

Density @ 15.6 C, g/cm3, ASTM D4052

0.842

Pour Point, °C, ASTM D97

-51

Total Base Number, mgKOH/g, ASTM D2896

8.4

Flash Point, Cleveland Open Cup, °C, ASTM D92

235

Hi-Temp Hi-Shear Viscosity @ 150 C, mPa.s, ASTM D4683

2.6

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

08-2021

Mobil Korea Lube Oil Inc.

Level 22, Seoul Square bd., Hangang-daero, Jung-gu, Seoul, Korea

+82-2-750-8700

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.