Mobil™ FD Lube Special 75W-85

Mobil passenger-vehicle-lube , South Korea

Heavy Duty Automotive Gear Lubricants

Product Description

Mobil™ FD Lube Special 75W-85 is a high performance, heavy duty gear lubricant formulated from high quality base oils and an advanced additive system.  This product is engineered for automotive heavy duty transmissions, axles, and final drives where protection against wear and scoring is required. This product is recommended by ExxonMobil for use in applications where API GL-4 service is required.


Features and Benefits

Today’s heavy equipment applications place higher performance demands on drivetrain lubricants. Higher speeds, higher torque, and heavier loads require improved formulations to maximise equipment life and optimise operating costs.  Longer service intervals place additional demands on the gear lubricant requiring effective basestock and additive systems.  Mobil FD Lube Special 75W-85 is engineered to meet these challenges.  The key benefits include:


Advantages and Potential Benefits

Good thermal stability and resistance to high temperature oxidation

Extended gear and bearing life due to minimal deposits

Longer seal life

Excellent rust and corrosion protection

Longer component life

Good low temperature lubrication

Reduced wear at start-up and ease of start-up

Compatible with typical seals and gaskets

Minimum leakage and reduced contamination

 SAE 75W-85 Viscosity Grade    Improved fuel economy vs SAE 90 or 140 oils                     



      Recommended by ExxonMobil for use in:

  • Heavy duty manual transmissions, axles and final drives requiring or allowing an SAE Viscosity 75W-85 API GL-4 automotive gear oil.
  • Passenger cars and automotive applications including hypoid gears operating under moderate to severe conditions


Specifications and Approvals

Mobil FD Lube Special is recommended by ExxonMobil for use in applications requiring:





Typical Properties

Mobil FD Lube Special Gear Oil Properties


SAE Grade


Viscosity, ASTM D 445


cSt @ 40ºC


cSt @ 100ºC


Viscosity Index, ASTM D 2270


Pour Point, ºC, ASTM D 97


Flash Point, ºC, ASTM D 92


Density @ 15ºC kg/l, ASTM D 4052


Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.


Mobil Korea Lube Oil Inc.

Level 22, Seoul Square bd., Hangang-daero, Jung-gu, Seoul, Korea


Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.