Mobil™ FD Lube Special 75W-85
Mobil passenger-vehicle-lube , Mongolia
Product Description
Mobil™ FD Lube Special 75W-85 is a high performance, heavy duty gear lubricant formulated from high quality base oils and an advanced additive system. This product is engineered for automotive heavy duty transmissions, axles, and final drives where protection against wear and scoring is required. This product is recommended by ExxonMobil for use in applications where API GL-4 service is required.
Features and Benefits
Today’s heavy equipment applications place higher performance demands on drivetrain lubricants. Higher speeds, higher torque, and heavier loads require improved formulations to maximise equipment life and optimise operating costs. Longer service intervals place additional demands on the gear lubricant requiring effective basestock and additive systems. Mobil FD Lube Special 75W-85 is engineered to meet these challenges. The key benefits include:
|
Features |
Advantages and Potential Benefits |
|
Good thermal stability and resistance to high temperature oxidation |
Extended gear and bearing life due to minimal deposits Longer seal life |
|
Excellent rust and corrosion protection |
Longer component life |
|
Good low temperature lubrication |
Reduced wear at start-up and ease of start-up |
|
Compatible with typical seals and gaskets |
Minimum leakage and reduced contamination |
| SAE 75W-85 Viscosity Grade | Improved fuel economy vs SAE 90 or 140 oils |
Applications
Recommended by ExxonMobil for use in:
- Heavy duty manual transmissions, axles and final drives requiring or allowing an SAE Viscosity 75W-85 API GL-4 automotive gear oil.
- Passenger cars and automotive applications including hypoid gears operating under moderate to severe conditions
Specifications and Approvals
|
Mobil FD Lube Special is recommended by ExxonMobil for use in applications requiring: |
75W-85 |
|
API GL-4 |
X |
Typical Properties
|
Mobil FD Lube Special Gear Oil Properties |
|
|
SAE Grade |
75W-85 |
|
Viscosity, ASTM D 445 |
|
|
cSt @ 40ºC |
60 |
|
cSt @ 100ºC |
11.8 |
|
Viscosity Index, ASTM D 2270 |
197 |
|
Pour Point, ºC, ASTM D 97 |
-39 |
|
Flash Point, ºC, ASTM D 92 |
190 |
|
Density @ 15ºC kg/l, ASTM D 4052 |
0.88 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
04-2024