Mobil Delvac Legend Coolant Heavy Duty Series

Mobil commercial-vehicle-lube , Mexico

Mobil commercial-vehicle Coolant/Antifreeze

Product Description

Mobil Delvac Legend Coolant Heavy Duty series  provides optimum protection against cavitation erosion, corrosion, scale, overheating, and freezing for all heavy-duty cooling system applications. It is precharged with a high quality Supplemental Coolant Additive (SCA).

 

Mobil Delvac Legend Coolant Heavy Duty series is a fully formulated universal formula coolant/antifreeze, having the advantages of low total dissolved solids, low silicate and incorporates nitrite to provide exceptional wet sleeve liner cavitation protection.

Additional advantages of using Mobil Delvac Legend Coolant Heavy Duty Series   include its phosphate-free formula that reduces the risk of scale and state-of-the-art corrosion inhibitors that eliminate the need for expensive deionized water.

 

Mobil Delvac Legend Coolant Heavy Duty series are formulated with organic corrosion inhibitors to provide total cooling system protection for 240,000 km  or 4000 hours 1.

 

1Results may vary based on vehicle/engine condition, driving and environmental conditions.

Features and Benefits

No initial SCA precharge required.

Effective corrosion protection for aluminum, brass, cast iron, colder, steel and copper.

Contains nitrite for excellent pitting protection for wet sleeve cylinder liners.

Phosphate-free formula reduces hard water scale deposits.

Inhibitor system helps reduce drop­out, gel and scale.

Compatible with other commercially available fully formulated coolants.

Compatible with heavy-duty diesel SCAs and cooling system filters.

Universal low silicate formula helps reduce deposits.

Applications

Mobil Delvac Legend Coolant Heavy Duty series are  recommended by ExxonMobil for use in2:

On-road and off-road heavy-duty diesel and gasoline engines.

Mixed fleets where both light-duty and heavy-duty vehicles are present.

 

MOBIL DELVAC LEGEND COOLANT 50/50 HEAVY DUTY  is a ready to use product. To insure the proper concentration level of the inhibitors and boil-over/freeze protection, do not add water or mix with other unknown coolants.

 

2 Consult OEM or ExxonMobil  to select the correct concentration. 

Specifications and Approvals 

MOBIL DELVAC LEGEND COOLANT 50/50 HEAVY DUTY recommended by ExxonMobil for use in applications requiring:
Cummins 14603
Detroit Diesel 7SE298
HD Volvo
Caterpillar HD coolant
 
Protection Table MOBIL DELVAC LEGEND
COOLANTHEAVY DUTY CONCENTRATE
MOBIL DELVAC LEGEND
COOLANT 50/50 HEAVY DUTY
MOBIL DELVAC LEGEND
COOLANT 33/67HEAVY DUTY
Frezind Down To -37 C -18 C
Boiling Up To +129 C +126 C
*Using a 15 PSI Pressure Cap
 
Meets the performance requirement of MOBIL DELVAC LEGEND
COOLANTHEAVY DUTY CONCENTRATE
MOBIL DELVAC LEGEND
COOLANT 50/50 HEAVY DUTY
MOBIL DELVAC LEGEND
COOLANT 33/67HEAVY DUTY
ASTM D6210 X X
ASTM D3306 X X
ASTM D4985 X X
ASTM D7583 X X
ASTM D4340 X X
 
 

Properties and Specifications

Chemical Properties: MOBIL DELVAC LEGEND
COOLANTHEAVY DUTY CONCENTRATE 3
MOBIL DELVAC LEGEND
COOLANT 50/50 HEAVY DUTY
MOBIL DELVAC LEGEND
COOLANT 33/67HEAVY DUTY
Property ASTM Method Typical Values For: Typical Values For:
Specific Gravity (20/20˚C) ASTM D1122 1.0476 1.053
Freezing Point ASTM D1120 -37 C -18 C
Boiling Point ASTM D 1120 108 C +126 C
PH, 50 Vol. % ASTM D1287 10.4 9.7
 
General description MOBIL DELVAC LEGEND
COOLANTHEAVY DUTY CONCENTRATE 3
MOBIL DELVAC LEGEND
COOLANT 50/50 HEAVY DUTY 4
MOBIL DELVAC LEGEND
COOLANT 33/67HEAVY DUTY
Color Rosa Rosa Rosa
Etilenglicol 100% 50% 33%
Water 50% 67%
 

3 Always dilute it with water. Consult OEM or ExxonMobil  to select the correct concentration.

4  It is a ready to use product.

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

09-2021

ExxonMobil Mexico, S.A. de C.V.
Poniente 146 No. 760 Col. Industrial Vallejo
C.P. 02300 Mexico, Ciudad de Mexico

(01 52) 55 5-333-9602 (01 52) 1-800-90-739-00

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.