Mobil Delvac Modern™ 15W-40 Full Protection Mine
Mobil commercial-vehicle-lube , Mexico
Product Description
Mobil Delvac Modern 15W-40 Full Protection Mine is a diesel engine oil formulated to offer ring liner wear protection, viscosity control and bearing corrosion protection for the higher demands of high horsepower off-highway engines.
Features and Benefits
Mobil Delvac Modern 15W-40 Full Protection Mine is formulated with optimized base oil technology, to deliver extended performance oil drain
intervals1. This proprietary formulation delivers wear protection, outstanding oxidation stability, and exceptional TBN retention.
Mobil Delvac Modern 15W-40 Full Protection Mine also provides outstanding resistance to oil oxidation, corrosive and abrasive wear, and high
temperature deposits.
1 Results vary based on vehicle/engine condition, driving and environmental conditions. Consult OEM or ExxonMobil before implementing extended
ODIs, especially if the equipment/vehicle is under warranty.
|
Features |
Advantages and Potential Benefits |
|
Outstanding oxidation stability |
Extended ODI potential ¹. |
|
Resistance to corrosive and abrasive wear |
Long life of critical wear surfaces. |
|
Excellent soot and viscosity control |
Greater engine efficiency, long engine life and long oil life. |
|
Excellent oil consumption control |
Lower oil costs due to less make-up oil during operation |
|
Outstanding TBN reserves |
Corrosion protection and extended drain intervals for both new and old engines |
|
Low temperature fluidity and pumpability |
Formulated for smooth starting in cold weather |
|
Component compatibility |
Long gasket and seal life |
|
Low ash formulation meeting API CK-4 and CJ-4 requirements |
Long emissions aftertreatment life (DPF, DOC and SCR) |
Applications
•Designed primarily for heavy duty diesel engines in mining applications.
•Recommended for the latest heavy duty diesel engines, including those equipped with aftertreatment systems and EGR.
•Recommended for diesel applications using older and naturally aspirated conventional designs.
•Off-highway applications including construction.
•Off-highway applications operating in severe low speed/heavy load conditions using up to 500 ppm sulfur fuels.
Specifications and Approvals
|
This product has the following approvals: |
|
MTU Oil Category 2.1 |
| Cummins CES 20081 |
| Cummins CES 20086 |
|
This product meets or exceeds the requirements of: |
|
API CI-4 |
|
API CI-4 PLUS |
|
API CJ-4 |
|
API CK-4 |
|
Caterpillar ECF-3 |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 15W-40 |
|
Viscosity Index, ASTM D2270 |
137 |
|
Total Base Number, mgKOH/g, ASTM D2896 |
9.2 |
|
Pour Point, °C, ASTM D97 |
-24 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
126 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
16.2 |
|
Ash, Sulfated, mass%, ASTM D874 |
1 |
|
Cold-Cranking Simulator, Apparent Viscosity @ -20 C, mPa.s, ASTM D5293 |
5870 |
|
Density @ 15.6 C, g/ml, ASTM D1298 |
0.87 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
05-2024