Mobil Delvac Modern™ 15W-40 Extended Performance
Mobil commercial-vehicle-lube , Mexico
Product Description
Mobil Delvac Modern™ 15W-40 Extended Performance is an premium semi-synthetic, high-performance diesel engine oil that provides extended ODI potential up to 2 times the average OEM ODI recommendation or up to 1,000 hours1 while helping to extend engine life for most high performance diesel engines in off-highway applications. Its robust formulation helps protect critical components in your engine, which gives you the potential to extend engine life.
Mobil Delvac Modern™ 15W-40 Extended Performance is specifically formulated with a reinforced additive system designed for use in a wide variety of heavy duty applications in off-highway environments, including engines found in the mining and construction sectors.
Our Mobil lubrication experts are well equipped to help support you with optimizing your maintenance programs, including areas beyond engine oils.
(1) Disclaimer: Based on typical OEM ODI 500 hrs. Results may vary based on operating conditions. Consult OEM or ExxonMobil before implementing extended ODIs, especially if the equipment/vehicle is under the OEM 's warranty.
Features and Benefits
Mobil Delvac Modern™ 15W-40 Extended Performance is an outstanding lubricant solution specifically designed for use in high horsepower engines found in mining, construction and the Oil and Gas sectors. Its advanced formulation is designed to last beyond typical OEM specified oil drain intervals which can help optimize maintenance schedules and increase equipment availability.
|
Features |
Advantages and Potential Benefits |
|
Extended oil drain interval |
Provides extended ODI potential up to 2 times the average OEM ODI recommendation or up to 1,000 hours2 |
|
Robust formulation with reinforced additive system |
Reduced engine wear to promote long engine life |
|
Excellent soot and viscosity control |
Protects engine under severe load |
|
Outstanding TBN reserves |
Corrosion protection and extended drain intervals for both new and old engines |
Applications
Recommended by ExxonMobil for use in:
Most engine generations up to the latest and most sophisticated high-performance diesel engines with turbocharger, direct-injection and low-emission designs.
Most high horsepower diesel engines in off-highway applications operating in severe low-speed/heavy-load conditions.
Please refer to the owners handbook for OEM application requirements and oil drain intervals for your vehicle or equipment.
Specifications and Approvals
|
This product has the following approvals: |
|
Cummins CES 20086 |
|
MTU Oil Category 2.1 |
|
This product meets or exceeds the requirements of: |
|
API CI-4 |
|
API CI-4 PLUS |
|
API CJ-4 |
|
API CK-4 |
|
Caterpillar ECF-3 |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 15W-40 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
15.8 |
|
Pour Point, °C, ASTM D97 |
-30 |
|
Density @ 15.6 C, g/ml, ASTM D1298 |
0.87 |
|
Cold-Cranking Simulator, Apparent Viscosity @ -20 C, mPa.s, ASTM D5293 |
5250 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
118 |
|
Total Base Number, mgKOH/g, ASTM D2896 |
9.2 |
|
Viscosity Index, ASTM D2270 |
142 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
10-2024