Mobil 1™ ESP x2 0W-20
Mobil passenger-vehicle-lube , Netherlands
Product Description
Mobil 1™ ESP x2 0W-20 is an advanced fully synthetic engine oil specifically designed to provide outstanding engine cleanliness, wear protection, strong durability and advanced fuel economy* to keep your engine running like new. Mobil 1™ ESP x2 0W-20 is our latest technology combining durability and protection with a low viscosity, low friction engine oil that was designed in cooperation with key European Original Equipment Manufacturers (OEMs). Mobil 1™ ESP x2 0W-20 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline powered European vehicles that require SAE 0W-20 viscosity grades.
* compared vs Mobil 1 ESP 5W-30.
Features and Benefits
| 
             Features  | 
            
             Advantages and Potential Benefits  | 
        
| 
             Active cleaning agents  | 
            
             Helps to prevent the buildup of harmful deposits to enable long and clean engine life** 
 Provides outstanding engine cleanliness and sludge control  | 
        
| 
             
  | 
            
             **Compared to vehicle manufacturer standard  | 
        
| 
             Outstanding thermal and oxidation stability  | 
            
             Helps to reduce oil aging allowing extended drain interval protection  | 
        
| 
             Enhanced frictional properties  | 
            
             Provides up to 4% fuel economy improvement when changing from a higher viscosity 5W-30 engine oil***  | 
        
| 
             
  | 
            
             ***Actual savings are dependent upon vehicle and engine type, outside temperature and barometric pressure, driving conditions and your current engine oil viscosity.  | 
        
| 
             Excellent low temperature capabilities  | 
            
             Quick cold weather performance to help provide fast protection at start-up  | 
        
| 
             Outstanding high temperature capabilities  | 
            
             Provided outstanding high temperature protection over the entire oil drain interval**  | 
        
| 
             
  | 
            
             **Compared to vehicle manufacturer standard  | 
        
| 
             Wear protection  | 
            
             Provides outstanding wear protection over the full oil drain interval**  | 
        
| 
             
  | 
            
             **Compared to vehicle manufacturer standard  | 
        
Applications
Mobil 1 ESP x2 0W-20 is recommended for the new high-performance gasoline, diesel and hybrid engines found in emerging European vehicles that require SAE 0W-20 viscosity grades.
• Mobil 1 ESP x2 0W-20 can only be used in the vehicles for which it is approved. It is not backward compatible with older vehicle engines.
• Mobil 1 ESP x2 0W-20 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
**** Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications
Specifications and Approvals
| 
             This product has the following approvals:  | 
        
| 
             GM dexosD Licensed  | 
        
| 
             MB-Approval 229.71  | 
        
| 
             Porsche C20  | 
        
| 
             VW 508 00  | 
        
| 
             VW 509 00  | 
        
| 
             This product meets or exceeds the requirements of:  | 
        
| 
             API SL  | 
        
| 
             ACEA C5  | 
        
| 
             ACEA C6  | 
        
| 
             API SN Engine Test Requirements  | 
        
| 
             API SP ENGINE TEST REQUIREMENTS  | 
        
| 
             API SQ Engine Test Requirements  | 
        
Properties and Specifications
| 
             Property  | 
            
             
  | 
        
| 
             Grade  | 
            
             SAE 0W-20  | 
        
| 
             Viscosity Index, ASTM D2270  | 
            
             180  | 
        
| 
             Density, 15.6C, g/cm3, ASTM D4052  | 
            
             0.842  | 
        
| 
             Kinematic Viscosity @ 100 C, mm2/s, ASTM D445  | 
            
             8.0  | 
        
| 
             Hi-Temp Hi-Shear Viscosity @ 150 C, mPa.s, ASTM D4683  | 
            
             2.6  | 
        
| 
             Ash, Sulfated, mass%, ASTM D874  | 
            
             0.8  | 
        
| 
             Flash Point, Cleveland Open Cup, °C, ASTM D92  | 
            
             230  | 
        
| 
             Pour Point, °C, ASTM D97  | 
            
             -60  | 
        
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
07-2025