Mobil EV™ Cool Drive 303
Mobil passenger-vehicle-lube , Netherlands
Product Description
Mobil EV™ Cool Drive 303 is a high performance fluid combining optimum lubrication characteristics and heat transfer capabilities for use in electric powertrain applications, where thermal management and compatibility with electrical components is equally important as lubrication of critical parts in motion.
Features and Benefits
• High volume resistivity helps minimize the risk of electric short circuits, static discharge, and allows for direct contact with electrical components
• Designed to be compatible with conductive and insulating materials
• Extended fluid life through superior thermal-oxidative stability and outstanding resistance against sludge and deposit formation
• Excellent corrosion protection and thermal-oxidative stability to maintain system cleanliness over equipment life
• Provides excellent friction control, suitable for select clutch plate operated shift devices
EV brand approved icon to represent “Further" Maintains excellent viscosity control over a wide range of temperatures, reducing viscous drag, which in turn helps vehicles go further between charges.
EV brand approved icon to represent “Longer" Helps prolong the life of your electrified vehicles, protecting components from wear, while helping prevent your electric motor from overheating. Helps extend the life of your gears/gearbox, bearings, & electric motor.
EV brand approved icon to represent “Safer" Helps keep your vehicles and components running safer.
Applications
Mobil EV™ Cool Drive 303 is designed for use in electric vehicle reduction gearboxes with and without integrated electric motor, balancing lubrication performance with cooling properties for electric components.
Properties and Specifications
Property |
|
Density @ 15 C, kg/m3, ASTM D4052 |
835 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
>200 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
27.4 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
5.7 |
Viscosity Index, ASTM D2270 |
154 |
Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983 |
8800 |
Pour Point, °C, ASTM D5949 |
-54 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
06-2024