Mobil™ ATF 220 Syn Tech

Mobil passenger-vehicle-lube , New Zealand

Automatic Transmission Fluid

Product Description

Mobil™ ATF 220 Syn Tech is a high performance fluid for automatic transmissions in vehicles requiring Dexron II/IID. It is also used as a hydraulic fluid in unique applications.

 

Features and Benefits

Mobil ATF 220 Syn Tech is formulated from high-quality conventional base oils combined with a special additive system including viscosity index improvers, antioxidants, and defoaments providing smooth and controlled friction/wear characteristics. The product provides consumers an excellent driving experience even in broad range of driving conditions in a wide variety of automobiles requiring Dexron II/IID specifications.

 

Features

Advantages and Potential Benefits

Good thermal and oxidation stability

Resists lacquer, sludge and deposit formation to keeps transmissions clean for efficient operation over the fill life

Good anti-wear properties

Meets the wear requirement to promote longer transmission life

Excellent low-temperature fluidity

Assist in improved start-up and clean fast lubrication at low ambient temperatures

Effective foam control properties

Smooth and lasting shift feel and reduced fluid loss in severe service-operating conditions

Compatible with all common seal materials used in Type IID transmissions

Maintains effective leakage control

 

Applications

Mobil ATF 220 Syn Tech is recommended for some automatic and manual transmissions in passenger cars and light trucks specifying Dexron II/IID level performance as well as the related power steering systems. It is also suitable for use in some special hydraulic systems in farm equipment and other installations having similar fluid requirements. It is recommended that the user consult the manufacturer's requirements. Other applications include:

 

• Off-highway transmissions power steering and other hydraulic systems.

 

• Industrial hydraulic systems and components.

Specifications and Approvals

 

This product is recommended for use in applications requiring:

Ford ESR-M2C163-A2

GM DEXRON II

GM DEXRON IID

GM Type A Suffix A

MB 236.7

R. Bosch AS TE-ML 09

 

Properties and Specifications

Property

 

Flash Point, Cleveland Open Cup, °C, ASTM D92

229

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

40.5

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

7

Pour Point, °C, ASTM D97

-42

Color, Visual

Red

Density @ 15 C, g/cm3, ASTM D4052

0.8624

Viscosity Index, ASTM D2270

131

Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983

41200

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

11-2021

Mobil Oil New Zealand Limited
164-188 Beaumont St
Auckland
New Zealand

+ 64 4 498 4000
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.