Mobil Delvac Modern 15W-40 Extreme Defense Mine

Mobil commercial-vehicle-lube , Peru

Semisynthetic technology diesel engine oil

Product Description

Mobil Delvac Modern 15W-40 Extreme Defense Mine is a semi synthetic, high performance, diesel engine oil that is specifically designed for lubrication of heavy duty diesel engines in the mining industry.

 

The advanced chemistry  of Mobil Delvac Modern  15W-40 Extreme Defense Mine provides optimum performance in modern heavy duty engines operating on high sulphur fuel.

Accordingly, this oil meets or exceeds the requirements of API  CI-4 PLUS and CI-4.

 

Features and Benefits

These products will provide outstanding protection in the most demanding diesel engines like Caterpillar and Cummins.

 

Features

Advantages and Potential Benefits

Support against corrosive wear

Long life of critical wear surfaces.

Wear rate reduction

Greater engine efficiency, long engine life and long oil life.

Outstanding oxidation stability

Lower oil costs due to less make-up oil during operatio

Resistance to corrosive and abrasive wear

Corrosion protection and extended drain intervals for both new and old engines

Excellent soot and viscosity control

Formulated for smooth starting in cold weather

Excellent oil consumption control

Long gasket and seal life

Outstanding TBN reserves

Extended ODI potential ¹

Low temperature fluidity and pumpability

 

Component compatibility

 

 

Applications

Mobil Delvac Modern 15W-40 Extreme Defense Mine  is recommended for use in a wide range of heavy-duty applications and operating environments including:

 

• Off-highway applications operating in severe low speed/heavy load conditions.

• Off-highway applications including mining and construction.

 

Specifications and Approvals

 

This product meets or exceeds the requirements of:

API CH-4

API CI-4

API CI-4 PLUS

Caterpillar ECF-2

Cummins CES 20078

 

Properties and Specifications

Property

 

Grade

SAE 15W-40

Cold-Cranking Simulator, Apparent Viscosity @ -20 C, mPa.s, ASTM D5293

5390

Density @ 15.6 C, g/ml, ASTM D1298

0.87

Flash Point, Cleveland Open Cup, °F, ASTM D92

234

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

15.5

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

117

Noack Volatility, mass%, ASTM D5800

9.1

Pour Point, °C, ASTM D97

-30

Total Base Number, mgKOH/g, ASTM D2896

10.8

Viscosity Index, ASTM D2270

140

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

10-2022

Terpel Comercial del Perú S.R.L.
Av. Jorge Basadre Grohmann 347,
Interior 1005, San Isidro
Lima, Perú
24 Horas emergencia en salud             LUBES (511)- 222 0284


Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.