Mobil Delvac Modern™ 15W-40 Complete Protection

Mobil commercial-vehicle-lube , Peru

Synthetic Technology

Product Description

Mobil Delvac Modern 15W-40 Complete Protection is an oil designed to meet warranty requirements for high-speed, four-stroke heavy duty diesel engines. This product is formulated to maintain the durability of emission control systems, including diesel particulate filters and other advanced aftertreatment systems.

Fully backward compatible, Mobil Delvac Modern 15W-40 Complete Protection is suitable for both newer and older heavy duty engine designs. Accordingly, this oil meet or exceed the requirements of API CK-4, CJ-4, CI-4 PLUS, CI-4 service categories. Also approved by major original equipment manufacturers (OEM).

Features and Benefits

Mobil Delvac Modern 15W-40 Protección Completa is formulated with optimized base oil technology that provides up to an average of 80% more viscosity control1 to helps protect your equipment life.

1.Based on API CK-4 viscosity increase from Volvo T13 engine oil test.

Applications

• Recommended for heavy duty diesel applications including low emission engine designs and those featuring EGR.

• Recommended for heavy duty diesel applications using older and naturally aspirated conventional designs.

Specifications and Approvals

This product has the following approvals:
Detroit Fluids Specification 93K218
Detroit Detroit Fluids Specification 93K222
Cummins CES 20086
Cummins CES 20081
VOLVO VDS-4.5
VOLVO VDS-4
RENAULT TRUCKS RLD-3
MACK EOS-4.5
Mack EO-O Premium Plus
Ford WSS-M2C171-F1

This product meets or exceeds the requirements of:
API CK-4
Caterpillar ECF-3

Properties and Specifications

Property
Grade	SAE 15W-40
Density @ 15.6 C, g/ml, ASTM D4052	0.88
Viscosity Index, ASTM D2270	136
Cold-Cranking Simulator, Apparent Viscosity @ -20 C, mPa.s, ASTM D5293	5869
Total Base Number, mgKOH/g, ASTM D2896	9.9
Ash, Sulfated, mass%, ASTM D874	1.0
Flash Point, Cleveland Open Cup, °C, ASTM D92	235
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445	108.6
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683	4.05
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445	14.48

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

09-2025

Terpel Comercial del Perú S.R.L.
Av. Jorge Basadre Grohmann 347,
Interior 1005, San Isidro
Lima, Perú
24 Horas emergencia en salud LUBES (511)- 222 0284

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.