MOBIL SUPER MOTO SINTETICO 20W-50
Mobil passenger-vehicle-lube , Peru
Product Description
Mobil Super Moto Synthetic 20W-50 is an full synthetic technology designed for four-stroke motorcycle engines. This product helps to provide an excellent level of performance demanded by today's high performance motorcycles. This product will help keep motorcycles running clean and protected even under some the most severe conditions
Features and Benefits
Mobil Super Moto Synthetic 20W-50 combines synthetic basestocks technology with a balanced component system to help provide engine cleanliness, wear protection at high temperatures and protection from corrosion. Regular use of Mobil Super Moto Synthetic 20W-50 helps maintain optimized power output due to the inherently performance and protection provided by the synthetic technology. This synthetic motorcycle engine oil helps to deliver strong performance under some of the most severe operating conditions. Key features and potential benefits
Features |
Advantages and Potential Benefits |
Optimized frictional properties |
Consistent power due to reduced frictional losses. Overall optimized balance of engine performance |
Low-temperature properties |
Excellent flow characteristics under extreme hot operating conditions helping to minimize deposit formation especially at the high operating temperatures found in air-cooled engines |
Excellent detergent/dispersant capability |
Excellent lubrication at cold operating conditions helping to enable easy starting, rapid wear protection and less drain on starter systems |
Effective protection from rust and corrosion |
Help to provide engine cleanliness, smooth and reliable operation |
|
Long life of critical valve train and bearing components |
Applications
Mobil Super Moto Synthetic 20W-50 is recommended by ExxonMobil for lubrication of four-stroke motorcycle engines in high performance motorcycles
Specifications and Approvals
This product is recommended for use in applications requiring: |
API SL |
This product meets or exceeds the requirements of: |
JASO MA2 |
Properties and Specifications
Property |
|
Grade |
SAE 20W-50 |
Noack Volatility, mass%, ASTM D5800 |
7 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
217 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
170.5 |
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
5.4 |
Density @ 15 C, g/ml, ASTM D4052 |
0.865 |
Viscosity Index, ASTM D2270 |
143 |
Cold-Cranking Simulator, Apparent Viscosity @ -15 C, mPa.s, ASTM D5293 |
5838 |
Pour Point, °C, ASTM D97 |
-36 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
20.7 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
08-2024