Mobil 1™ ESP X4 0W-40
Mobil passenger-vehicle-lube , French Polynesia
Product Description
Mobil 1™ ESP X4 0W-40 is an advanced full synthetic engine oil specifically designed to provide outstanding wear protection, engine cleanliness, and strong durability to keep your engine running like new.
Mobil 1™ ESP X4 0W-40 combines durability and protection with a low friction engine oil that was designed in cooperation with key European Original Equipment Manufacturers (OEMs).
Mobil 1™ ESP X4 0W-40 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline powered European vehicles that require SAE 0W-40 viscosity grades.
Features and Benefits
Mobil 1™ ESP X4 0W-40 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF) and Gasoline Catalytic Converters (CAT). Mobil 1™ ESP X4 0W-40 has been designed to help deliver outstanding performance and protection.
Key features and potential benefits include:
• Reduce particulate buildup in diesel particulate filters
• Reduce poisoning of gasoline catalytic converters
• Reduce deposits and sludge buildup to enable long and clean engine life
• Reduce oil aging, allowing extended drain interval protection
Applications
Mobil 1™ ESP X4 0W-40 is recommended for high-performance gasoline and diesel engines in the latest passenger cars, SUVs and light vans that require SAE 0W-40 viscosity grades.
• Mobil 1™ ESP X4 0W-40 helps to protect exhaust gas after-treatment systems designed to limit engine emissions.
• Mobil 1™ ESP X4 0W-40 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications
Specifications and Approvals
|
This product has the following approvals: |
|
Porsche A40 |
|
PORSCHE C40 |
|
VW 511 00 |
|
MB 229.52 |
|
MB 229.51 |
|
GM DexosR |
|
This product is recommended for use in applications requiring: |
|
API CF |
|
ACEA C2-21 Application Suitable |
|
This product meets or exceeds the requirements of: |
|
API SP |
|
ACEA C3 |
|
FIAT FIAT 9.55535-S2 |
|
API SQ |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 0W-40 |
|
Total Base Number, mgKOH/g, ASTM D2896 |
9.1 |
|
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
3.8 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
13.9 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
72 |
|
Viscosity Index, ASTM D2270 |
201 |
|
Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684 |
21100 |
|
Density @ 15 C, g/ml, ASTM D4052 |
0.846 |
|
Pour Point, °C, ASTM D97 |
-54 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
230 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
06-2025