Mobil 1™ ESP X2 0W-20

Mobil passenger-vehicle-lube , Pakistan

Advanced Fuel Economy, Advanced full synthetic engine oil

Product Description

Mobil 1™ ESP X2 0W-20 is an advanced full synthetic engine oil specifically designed to provide outstanding wear protection, engine cleanliness, strong durability and advanced fuel economy* to keep your engine running like new.


Mobil 1™ ESP X2 0W-20 combines durability and protection with a low viscosity, low friction engine oil that was designed in cooperation with key European Original Equipment Manufacturers (OEMs).


Mobil 1™ ESP X2 0W-20 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline powered vehicles that require SAE 0W-20 viscosity grades.



* compared vs Mobil 1 ESP Formula 5W-30.


Features and Benefits

Mobil 1™ ESP X2 0W-20  is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF's) and Gasoline Catalytic Converters (CAT's). Mobil 1™ ESP X2 0W-20 has been designed to help deliver outstanding performance and protection in conjunction with fuel economy benefits.


Key features and potential benefits include:

•  Reduce particulate buildup in diesel particulate filters

•  Reduce poisoning of gasoline catalytic converters

•  Reduce deposits and sludge buildup to enable long and clean engine life

•  Reduce oil aging, allowing extended drain interval protection

•  Aid fuel economy



Mobil 1™ ESP X2 0W-20 is recommended for high-performance gasoline and diesel engines in the latest passenger cars, SUVs and light vans that require SAE 0W-20 viscosity grades.


•  Mobil 1™ ESP X2 0W-20 helps to protect exhaust gas after-treatment systems designed to limit engine emissions.


•  Mobil 1™ ESP X2 0W-20 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.



**** Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications


Specifications and Approvals


This product has the following approvals:

MB-Approval 229.71

Porsche C20

VW 508 00

VW 509 00


This product meets or exceeds the requirements of:






Properties and Specifications




SAE 0W-20

Density, 15.6C, g/cm3, ASTM D4052


Total Base Number, mgKOH/g, ASTM D2896


Viscosity Index, ASTM D2270


Pour Point, °C, ASTM D97


Flash Point, Cleveland Open Cup, °C, ASTM D92


Ash, Sulfated, mass%, ASTM D874


Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684


Hi-Temp Hi-Shear Viscosity @ 150 C, mPa.s, ASTM D4683


Kinematic Viscosity @ 100 C, mm2/s, ASTM D445


Kinematic Viscosity @ 40 C, mm2/s, ASTM D445



Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.


Mobil Askari Lubricants Limited
D-46, Block-5
KDA Scheme-5, Clifton
Karachi, Pakistan 

Phone: (92-21) 111-840-840 Fax : (92-21) 583-1013 and 583-0082

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.