Mobil 1™ FS X2 5W-40

Mobil passenger-vehicle-lube , Pakistan

Advanced Full Synthetic Motor Oil

Product Description

Mobil 1™ FS X2 5W-40 European Car Formula is an advanced full synthetic motor oil engineered for the latest gasoline and diesel (without DPFs) engine technology delivering excellent all-around performance. It provides exceptional cleaning power, wear protection and overall performance.

 

Features and Benefits

Mobil 1™ FS X2 5W-40 is made with a proprietary blend of ultra-high performance synthetic basestocks fortified with a precisely balanced component system.

 

Features

Advantages and Potential Benefits

Outstanding thermal and oxidation stability

Helps to resist oil aging allowing extended drain interval protection

Excellent low temperature capabilities

Outstanding cold starting and fast lubrication to protect against wear

Active cleaning agents

Designed to clean up sludge left behind in your engine

Low oil volatility

Helps reduce oil consumption

High viscosity index

Excellent overall lubrication and wear protection performance for many driving styles and conditions, from mild to severe

 

Applications

Mobil 1™ FS X2 5W-40 is recommended by ExxonMobil for all types of vehicles, including high-performance turbo-charged, supercharged gasoline and certain diesel multi-valve fuel injected engines found in passenger cars, SUVs, light vans and trucks.

 

• Mobil 1™ FS X2 5W-40 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.

 

Always check your owner's manual for the manufacturer's recommended oil viscosity grade, API service classification and any builder approval.

 

Specifications and Approvals

 

This product has the following approvals:

MB-Approval 229.3

VW 502 00

VW 505 00

RENAULT RN0700

RENAULT RN0710

 
 

This product is recommended for use in applications requiring:

ACEA A3/B3-16

 
 

This product meets or exceeds the requirements of:

API SJ

API SL

API SM

API SN

ACEA A3/B4

Fiat 9.55535-M2

 

Properties and Specifications

Property

 

Grade

SAE 5W-40

Pour Point, °C, ASTM D97

-40

Total Base Number, mgKOH/g, ASTM D2896

12.5

Ash, Sulfated, mass%, ASTM D874

1.1

Flash Point, Cleveland Open Cup, °C, ASTM D92

241

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

81

Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683

3.7

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

13.2

Density @ 15.6 C, g/ml, ASTM D4052

0.841

Viscosity Index, ASTM D2270

170

Mini-Rotary Viscometer, Apparent Viscosity, -35 C, mPa.s, ASTM D4684

22000

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

09-2024

Mobil Askari Lubricants Limited
D-46, Block-5
KDA Scheme-5, Clifton
Karachi, Pakistan 

Phone: (92-21) 111-840-840 Fax : (92-21) 583-1013 and 583-0082
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.