Vacmul EDM 3
Mobil industrial , Singapore
Multipurpose Electro Discharge Machining Fluids
Vacmul EDM 3 fluid is multipurpose dielectric fluid for use in all discharge machines working by penetration especially for roughing, finishing and superfinishing work. Vacmul EDM is very pure fluid designed for maximum machine productivity and operator comfort when used in electrical-discharge machining, also called spark-erosion machining. In this metalworking process metal is removed from a workpiece by applying a potential difference between the workpiece and a shaped electrode. Vacmul EDM has the ability to provide uniform insulation and then to permit controlled electrical discharge at the breakdown voltage.
Vacmul EDM 3 has the correct balance of viscosity, volatility, oxidation stability, heat transfer characteristics, low odour and low toxicity. Vacmul EDM 3 is a highly refined, narrow-cut, low viscosity fluid specially suited to finishing operations where a high quality finish is required. It functions as an insulator between tool and workpiece, spark conductor, coolant and as a flushing oil for chip removal. Vacmul EDM is recommended for roughing operations where a high metal removal rate is required and for finishing and superfinishing work.
Features and Benefits
|Features||Advantages and Potential Benefits|
|Highflash point||Limits fire risk|
|Excellent filterability through cartridge and earth||Increased production|
|High wetability||Ensures liquid / metal contact and fewer rejects|
|Bright, clean and odourless.||Easy viewing of work piece and fixtures|
|Low skin sensitivity in normal use||Easy handling and improved workshop environment|
|Non fatty compared to more viscous fluids.||Higher metal removal rate and stable electrical discharge|
|Good detergency with respect to small particles.||Provides uniform insulation, higher precision and surface finish|
- Excellent for all electro discharge machines that work by penetration.
- Especially suitable for roughing, finishing and superfinishing work.
|Density @ 15°C, kg/l ASTM D1298||0.799|
|Viscosity cSt at 40°C mm2/s ASTM D445||2.37|
|Flash Point, (P.M.) °C||108|
|Appearance||Clear and Bright|
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design, and Vamul are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.05-2020