MOBILGEAR™ EP SERIES

Mobil industrial , Singapore

Gear Oil

Product Description

Mobilgear™ EP Series are industrial extreme pressure gear oils formulated with high quality mineral oils, which help reduce sludge formation, helping to increase oil service life.

Mobilgear EP Series contain an additive system that gives high load carrying ability and protection against wear, plus protection against corrosion.

Mobilgear EP Series have good water handling properties and can be used in either splash or circulating systems.

Mobilgear EP Series are suitable for use wherever industrial gear oils are specified, and provide protection in applications where shock loading occurs.

 

Features and Benefits

Mobilgear EP Series can handle a variety of industrial gear applications. They are manufactured with high quality mineral stocks and a specially chosen additive system, under the highest level of quality assurance and control in our modern blending facilities.

 

Mobilgear EP Series offer the following benefits:

- EP wear protection of gears and bearings

- Resistance to sludge formation

- Good oxidation resistance for long oil charge life

- Good demulsibility to ease water removal

- Applicable for use in splash or circulation systems

 

Applications

Mobilgear EP Series are suitable in a wide range of industrial spur, helical, bevel and steel-on-steel worm gearing, including drives for conveyers, agitators, dryers, fans, mixers, presses, pulpers, pumps, screens, extruders, and oil well pumps.

 

Specifications and Approvals

 

This product meets or exceeds the requirements of:

MOBILGEAR EP 150

MOBILGEAR EP 220

MOBILGEAR EP 320

MOBILGEAR EP 460

China GB 5903-2011, L-CKD

X

X

X

X

 

Properties and Specifications

Property

MOBILGEAR EP 150

MOBILGEAR EP 220

MOBILGEAR EP 320

MOBILGEAR EP 460

Grade

ISO 150

ISO 220

ISO 320

ISO 460

Copper Strip Corrosion, 3 h, 100 C, Rating, ASTM D130

1A

1A

1A

1A

EP Properties, Timken OK Load, lb, ASTM D2782

60

60

60

60

Emulsion, Time to 37 mL Water, 82 C, min, ASTM D1401

30

30

30

35

FZG Scuffing, A/8.3/90, Fail Stage, Rating, DIN 51354

12+

12+

12+

12+

Flash Point, Cleveland Open Cup, °C, ASTM D92

230

240

240

240

Four-Ball Extreme Pressure Test, Load Wear Index, kgf, ASTM D2783

56

60

60

60

Four-Ball Extreme Pressure Test, Weld Load, kgf, ASTM D2783

300

300

300

300

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

14.7

19

24.1

30.6

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

150

220

320

460

Pour Point, °C, ASTM D97

-24

-24

-21

-15

Rust Characteristics, Procedure B, ASTM D665

Pass

Pass

Pass

Pass

Viscosity Index, ASTM D2270

97

97

97

96

 

Health and Safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

11-2022

ExxonMobil Asia Pacific Ltd
1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633

+65 6885 8000
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.