Mobilube™ HD Plus 85W-140

Mobil commercial-vehicle-lube , Thailand

Extra High Performance Commercial Gear Lubricants

Product Description

Mobilube HD Plus 85W-140 is an extra high performance commercial gear lubricant formulated from select base oil and an advanced additive system. This lubricant is engineered for performance in heavy-duty commercial transmissions, axles, and final drives where extreme pressures and shock loading are expected. They provide excellent chemical and thermal stability at elevated bulk oil temperatures, good performance at low temperatures, and have demonstrated good rust protection resulting from water contamination and wet conditions. They are recommended by ExxonMobil for applications where API GL-5 and MT-1 service is required.

 

Features and Benefits

Today's heavy equipment applications place higher performance demands on drive train lubricants. Higher speeds, higher torque, and heavier loads require improved formulations to maximise equipment life and optimise operating costs. Longer service intervals place additional demands on the gear lubricant. Mobilube HD Plus 85W-140 gear lubricant is engineered to meet these challenges. The key benefits include:

 

Features

Advantages and Potential Benefits

Excellent thermal stability and resistance to high temperature oxidation

Extended gear and bearing life due to minimal deposits and longer seal life

Good protection against low speed/high torque wear and against high speed scoring

Increased load carrying capability and reduced operating costs

Excellent rust, staining, and corrosion protection

Reduced wear and longer component life

Effective low temperature lubrication

Reduced wear and ease of start-up

Wide multipurpose capability

Reduced number of gear lubricants to simplify inventory and minimize misapplication

Good resistance to foaming

Maintains film strength for effective lubrication

Compatible with typical automotive seals and gaskets

Minimum leakage and reduced contamination

 

Applications

Recommended by ExxonMobil for use in:

     •  Heavy-duty manual transmissions, axles, and final drives requiring API GL-5 and MT-1 level performance

     •  On-highway light and heavy-duty trucks, buses, vans, and cars

     •  Off-highway industries including: construction, mining, quarrying, and agriculture

     •  Other heavy-duty industrial and automotive applications involving hypoid and other gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque conditions prevail

     •  Initial fill, top-off, and refill of enclosed commercial gearing in manual or semiautomatic transmissions where gear lubricants are recommended including drive axles and final drives

     •  Not recommended for applications requiring API GL-4 Level performance

     •  Not intended for transmissions for which engine oil or automatic transmission fluids are recommended.

 

Specifications and Approvals

 

This product has the following approvals:

Mack GO-J

Volvo 97321

 

This product is recommended for use in applications requiring:

MIL (US) MIL-PRF-2105E

 

This product meets or exceeds the requirements of:

API GL-5

API MT-1

Meritor O-94

Scania STO 1:0

 

Properties and Specifications

Property

 

Grade

SAE 85W-140

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

26.5

Pour Point, °C, ASTM D97

-18

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

360

Flash Point, Cleveland Open Cup, °C, ASTM D92

228

Specific Gravity, 15.6 C/15.6 C, ASTM D4052

0.906

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

03-2023

ExxonMobil Marketing (Thailand) Limited

3195/26, 22nd Floor, Rama IV Road

Klong Ton, Klong Toey District

Bangkok 10110

Thailand

 

+66 2 407 4000

http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.