Mobilube™ HD-A 85W-90

Mobil commercial-vehicle-lube , Ukraine

Automotive Gear Lubricant

Product Description

Mobilube HD-A 85W-90 is a heavy duty gear lubricant formulated from high performance base oils and an advanced additive system. This lubricant is engineered for commercial transmissions, axles, and final drives where extreme pressures and shock loading are expected and is recommended by ExxonMobil for applications performance where API GL-5 service is required.

 

Features and Benefits

Today's heavy equipment applications place higher performance demands on drive-train lubricants. Higher speeds, higher torque, and heavier loads require improved formulations to maximise equipment life and minimise operating costs. Longer service intervals place additional demands on the gear lubricant requiring effective basestock and additive systems. Mobilube HD-A 85W-90 gear lubricant is engineered to meet these challenges. The key benefits include:

 

Features

Advantages and Potential Benefits

Excellent thermal stability and resistance to high temperature oxidation

Extended gear and bearing life due to minimal deposits

Longer seal life

Good protection against low speed/high torque wear and against high speed scoring especially in heavily loaded rear axles

Increased load carrying capability

Reduced maintenance costs and longer equipment life

Effective rust and corrosion protection

Reduced wear and longer component life

Multipurpose capability

Reduced number of gear lubricants required

Compatible with typical automotive seals and gaskets

Minimum leakage and reduced contamination

Extended drain capability

Increased productivity and reduced operating costs

 

Applications

Recommended by ExxonMobil for use in:

     •  Heavy duty automotive manual transmissions, axles, and final drives requiring API GL-5 level performance

     •  On highway cars and light trucks; heavy duty commercial vehicles

     •  Off highway industries including: construction, mining, quarrying, and agriculture

     •  Other gearboxes, steering gears and variable gearboxes

     •  Other heavy duty industrial and automotive applications involving hypoid gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque prevail

 

Specifications and Approvals

This product has the following approvals:

MB-Approval 235.0

ZF TE-ML 16C

ZF TE-ML 17B

ZF TE-ML 19B

ZF TE-ML 21A

 

This product is recommended for use in applications requiring:

MAN 342 Typ M1

 

This product meets or exceeds the requirements of:

API GL-5

ZF TE-ML 07A

 

Properties and Specifications

Property

 

Grade

SAE 85W-90

Density @ 15 C, kg/l, ASTM D4052

0.9

Flash Point, Cleveland Open Cup, °C, ASTM D92

222

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

17

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

184

Pour Point, °C, ASTM D97

-24

Viscosity Index, ASTM D2270

99

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

02-2023

.

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.