Mobilube™ GX-A 80W

Mobil commercial-vehicle-lube , Uruguay

Automotive Gear Lubricant

Product Description

Mobilube GX-A 80W is an automotive gear lubricant formulated from high performance base oils and an advanced additive system.  This lubricant is engineered for commercial transmissions, axles, and final drives where protection against wear and scoring is required.  It is recommended by ExxonMobil for use in Mercedes Benz applications where MB-Approval 235.1 is required and in applications where API GL-4 service is required.

 

Features and Benefits

Today's drivetrain applications place higher performance demands on lubricants. Higher speeds, higher torque, and heavier loads require improved formulations to maximise equipment life and optimise operating costs. Longer service intervals place additional demands on the gear lubricant requiring effective basestock and additive systems. Mobilube GX-A 80W is engineered to meet these challenges. The key benefits include:

 

Features

Advantages and Potential Benefits

Good thermal stability and resistance to high temperature oxidation

Long gear and bearing life due to minimal deposits

Long seal life

Excellent rust and corrosion protection

Long component life

Good low temperature lubrication

Reduced wear at start-up and ease of start-up

Compatible with typical automotive seals and gaskets

Minimum leakage and reduced contamination

 

Applications

Recommended by ExxonMobil for use in:

     •  Manual transmissions and drive axles requiring API GL-4 level performance

     •  Passenger cars, onhighway light and heavy-duty trucks and commercial vehicles

     •  Off-highway industries including: construction, quarrying, and agriculture

     •  Other industrial, commercial, and automotive applications including hypoid gears operating under moderate to severe operating conditions

 

Specifications and Approvals

This product has the following approvals:

MB-Approval 235.1

ZF TE-ML 17A

 

This product is recommended for use in applications requiring:

API GL-4

MAN 341 Typ Z1

 

This product meets or exceeds the requirements of:

R. Bosch AS TE-ML 08

 

Properties and Specifications

Property

Grade

SAE 80W

Density @ 15 C, kg/l, ASTM D4052

0.89

Flash Point, Cleveland Open Cup, °C, ASTM D92

216

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

10.0

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

76

Pour Point, °C, ASTM D97

-30

Viscosity Index, ASTM D2270

104

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

08-2020

DISA Montevideo S.A. - San Fructuoso, 927, Montevideo - Centro Técnico (598) 22009920 interno 55175, en caso de derrames

(598) 22007185.

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.