Mobil Super™ All-In-One Protection 5W-30
Mobil passenger-vehicle-lube , Vietnam
Product Description
Mobil Super™ All-In-One Protection 5W-30 is brought to you by the makers of Mobil 1. This full synthetic engine oil is tailored for smoother acceleration and provides outstanding engine wear protection even under the most demanding driving conditions.
Mobil Super™ All-In-One Protection 5W-30 is formulated with Heat-Activated Anti-Wear Molecules technology which provides superior engine protection under high temperature and proven in latest API SP engine test to provides better engine wear protection up to 65%*.
Mobil Super™ All-In-One Protection 5W-30 is proven during API SP engines test in reduces damaging Low Speed Pre-Ignition (LSPI) problem is modern engines. This helps to improve engine efficiencies and prolong engine life.
Features and Benefits
Features and Benefits
• Suitable for Toyota, Honda, Nissan, Hybrid and other newer Japanese gasoline engines
• Heat Activated Anti-Wear Molecule provides high temperature wear protection while keeping your engine clean
• Better engine wear protection up to 65%*
• Improve engine efficiencies by reducing Engine Low Speed Pre-Ignition (LSPI)
*Based on Sequence IVB (Iron Wear) test result versus API SP engine test requirement. Result varies subject to engine, temperature and actual driving conditions.
Applications
Mobil Super™ All-In-One Protection 5W-30 exceeds the latest API SP gasoline engine oil test specification and can be use in cars that requires API SP/SN PLUS/SN specifications. It is also recommended for diesel engine application requiring 5W-30 viscosity and API CF specification.
Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle.
Specifications and Approvals
This product is recommended for use in applications requiring: |
GM 6094M |
API CF |
This product meets or exceeds the requirements of: |
ILSAC GF-6A |
API SP RESOURCE CONSERVING |
API SP |
API SN PLUS |
API SN |
API SM |
FORD WSS-M2C961-A1 |
Properties and Specifications
Property |
|
Grade |
SAE 5W-30 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
232 |
Pour Point, °C, ASTM D97 |
-36 |
Viscosity Index, ASTM D2270 |
161 |
Total Base Number, mgKOH/g, ASTM D2896 |
7.5 |
Density @ 15 C, g/ml, ASTM D1298 |
0.857 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
10.6 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
62 |
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
3 |
Mini-Rotary Viscometer, Apparent Viscosity, -35 C, mPa.s, ASTM D4684 |
13900 |
Ash, Sulfated, mass%, ASTM D874 |
0.7 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
04-2024