Mobilube™ FE Plus NG 75W-85

Mobil passenger-vehicle-lube , South Africa

Fully Synthetic Automotive Axle Oil

Product Description

Mobilube™ FE Plus NG 75W-85 is a hypoid gear oil formulated from high performance base oils and an advanced additive system.  This product has been specifically engineered for use in Mercedes Benz passenger car axles and other applications specified by MB 235.7, MB 235.74 or MB 239.71.


Features and Benefits

Today's drivetrain applications place higher performance demands on lubricants. Higher speeds, higher torque and heavier loads require improved formulations to maximise equipment life and optimise operating costs. Longer service intervals place additional demands on the gear lubricant requiring effective basestock and additive systems. Mobilube FE Plus NG 75W-85 is engineered to meet these challenges. The key benefits include:



Advantages and Potential Benefits

Good thermal stability and resistance to high temperature oxidation

Long gear and bearing life due to minimal deposits

Excellent rust and corrosion protection

Long seal life

Good low temperature lubrication

Long component life

Low SAE Viscosity Grade andenhanced frictional properties

Reduced wear at start-up and ease of start-up


Optimised axle efficiency


Fuel economy potential


Specifications and Approvals

This product has the following approvals:

MB-Approval 235.7

MB-Approval 235.74

MB-Approval 239.71


Properties and Specifications




SAE 75W-85

Flash Point, Cleveland Open Cup, °C, ASTM D92


Kinematic Viscosity @ 100 C, mm2/s, ASTM D445


Pour Point, °C, ASTM D97


Viscosity Index, ASTM D2270


Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983


Kinematic Viscosity @ 40 C, mm2/s, ASTM D445


Density @ 15 C, kg/m3, ASTM D4052



Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.