Vacmul EDM 3

Multipurpose Electro Discharge Machining Fluids

Vacmul EDM 3 fluid is multipurpose dielectric fluid for use in all discharge machines working by penetration especially for roughing, finishing and superfinishing work. Vacmul EDM is very pure fluid designed for maximum machine productivity and operator comfort when used in electrical-discharge machining, also called spark-erosion machining. In this metalworking process metal is removed from a workpiece by applying a potential difference between the workpiece and a shaped electrode. Vacmul EDM has the ability to provide uniform insulation and then to permit controlled electrical discharge at the breakdown voltage.

Vacmul EDM 3 has the correct balance of viscosity, volatility, oxidation stability, heat transfer characteristics, low odour and low toxicity. Vacmul EDM 3 is a highly refined, narrow-cut, low viscosity fluid specially suited to finishing operations where a high quality finish is required. It functions as an insulator between tool and workpiece, spark conductor, coolant and as a flushing oil for chip removal. Vacmul EDM is recommended for roughing operations where a high metal removal rate is required and for finishing and superfinishing work.

Datasheets

Features and Benefits

Features Advantages and Potential Benefits
Highflash point Limits fire risk
Excellent filterability through cartridge and earth Increased production
High wetability Ensures liquid / metal contact and fewer rejects
Bright, clean and odourless. Easy viewing of work piece and fixtures
Low skin sensitivity in normal use Easy handling and improved workshop environment
Non fatty compared to more viscous fluids. Higher metal removal rate and stable electrical discharge
Good detergency with respect to small particles. Provides uniform insulation, higher precision and surface finish

Applications

  • Excellent for all electro discharge machines that work by penetration.
  • Especially suitable for roughing, finishing and superfinishing work.

Typical Properties

 

Vacmul EDM 3
Density @ 15°C, kg/l ASTM D1298 0.799
Colour, Saybolt +30
Viscosity cSt at 40°C mm2/s ASTM D445 2.37
Flash Point, (P.M.) °C 108
IBP °C 243
FBP °C 272
Appearance Clear and Bright

 


Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.