Mobil Delvac™ 1 ESP 5W-30

Advanced full synthetic, high-performance diesel engine oils

Mobil Delvac 1 ESP 5W 30 Product

Mobil Delvac 1 ESP 5W-30 is an advanced full synthetic, high-performance diesel engine oil that delivers long drain capability and fuel economy potential* while helping to extend engine life for modern diesel engines operating in severe conditions.

Mobil Delvac 1 ESP 5W-30 diesel engine oil is formulated to deliver exceptional performance in newer and older engine designs, including those with emission control systems. Its formulation meets or exceeds the requirements of original equipment manufacturers (OEMs) with state-of-the-art technology that provides:

  • Outstanding performance at extreme temperatures
  • Our best protection for drivers with extended oil drain intervals
  • Enhanced emission system protection in a variety of severe conditions

Mobil Delvac 1 ESP 5W-30 diesel engine oil is recommended by ExxonMobil for use in:

  • Most engine generations up to the latest and most sophisticated high-performance diesel engines with turbocharger, direct-injection and low-emission designs
  • On-highway applications operating in both high-speed/high-load and short-haul pick-up/delivery
  • Off-highway applications operating in severe low-speed/heavy-load conditions
  • High-performance gasoline engines and mixed fleets
  • Heavy-duty diesel engines using low-sulfur diesel fuels and many biodiesel fuel formulations
  • Naturally aspirated and turbocharged, diesel-powered equipment
  • Virtually all diesel-powered equipment from American and European builders
  • Refrigeration units
Chart comparing the performance levels of Mobil Delvac 1™ ESP heavy-duty diesel engine oils

*Compared to an SAE 15W-40 engine oil. Actual savings are dependent on vehicle/engine type, outside temperature, driving conditions and your current engine oil viscosity.
†Based on measured viscosity increase in the Volvo T-13 test.
‡Average OEM ODI recommendation based on recommended oil drain intervals from major U.S. engine manufacturers using API CJ-4 oils for a variety of service severity levels and engine models. Average OEM ODI API CJ-4 recommendation to substantiate multiplier claims is 31,750 miles. Results may vary based on vehicle/engine condition, driving and environmental conditions. Consult OEM or ExxonMobil before implementing extended ODIs, especially if the equipment/vehicle is under the OEM’s warranty.
§As compared to a mineral 15W-40 engine oil. Fuel economy improvements are dependent on vehicle/equipment type, outside temperature, driving conditions and your current fluid viscosities.

Features and Benefits

Mobil Delvac 1™ ESP 5W-30 is an outstanding lubricant solution for modern and latest engine technology equipped with emission After-Treatment devices. It was developed by ExxonMobil to maintain unsurpassed oxidation stability performance to meet long oil drain intervals and support low maintenance efforts. Mobil Delvac 1™ ESP 5W-30 keeps at the same time critical and hot engine parts clean, also while bio diesel fuel components are used, for long and efficient engine life. This feature, in combination with the sophisticated additive system, ensures exceptional engine wear performance and supports long engine life. The low ash formulation protects at the same time all exhaust after-treatment parts required to meet emissions regulations.

 

The key benefits of Mobil Delvac 1™ ESP 5W-30 include:

 

Features

Advantages and Potential Benefits

Unsurpassed thermal and oxidation stability

Prevention of deposits and smooth engine operation

Step out wear protection

Reduced engine wear to promote long engine life

Bio fuel compatible

Maintains engine cleanliness and protection with bio fuel components

Enhanced fuel economy potential

Reduced fuel consumption

Extended drain interval capability

Fewer oil changes and less oil disposal

Emission system protection

Emissions system durability and performance

 

Applications

Recommended by ExxonMobil for use in:

     •  Most engine generations up to latest and most sophisticated high performance diesel engines with turbo-charger, direct injection and low emission designs, featuring all types of exhaust after-treatment technology

     •  Heavy duty diesel engines using low sulfur diesel fuels and many biodiesel fuel formulations

     •  Naturally aspirated and turbo-charged diesel powered equipment

     •  On-highway short-haul and long-haul trucks and buses

     •  Off-highway equipment

 

Specifications and Approvals

This product meets or exceeds the requirements of:

ACEA E6

ACEA E7

ACEA E9

API CK-4

API CJ-4

API CI-4 PLUS

API SN

API SM

JASO DH-2

DAF Extended Drain

CATERPILLAR ECF-3

 

Properties and Specifications

Property

 

Grade

SAE 5W-30

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

12

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

73

Cold-Cranking Simulator, Apparent Viscosity @ -30 C, mPa.s, ASTM D5293

6430

Mini-Rotary Viscometer, Apparent Viscosity, -35 C, mPa.s, ASTM D4684

19700

Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683

3.6

Viscosity Index, ASTM D2270

160

Ash, Sulfated, mass%, ASTM D874

1

Total Base Number, mgKOH/g, ASTM D2896

11

Pour Point, °C, ASTM D97

-42

Flash Point, Cleveland Open Cup, °C, ASTM D92

241

Density @ 15 C, g/ml, ASTM D1298

0.851

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx