Mobil ATF™ D/M

Provides excellent oxidation and friction stability

Mobil ATF™ D/M

Provides oxidation and friction stability and anti-wear properties desired for most automatic transmissions. A synthetic blend ATF.

We stand behind our products. Read our Mobil ATF limited warranty.

Features and Benefits

Advantages offered by Mobil ATF D/M over transmission fluids of lower quality are:

•  Excellent oxidation stability — helps resist chemical deterioration over long service periods.

•  High viscosity index — helps retain adequate lubricating body for severe hot-weather service without thickening excessively at low starting temperatures

•  Corrosion prevention — helps provide protection against rusting and corrosion, plus special protection for soldered fittings

•  Foaming resistance — contains an effective anti-foaming agent

•  Elastomer compatibility — is not harmful to synthetic rubber seal materials.

•  Good lubricating characteristics — gives quiet operation, smooth shifting, and excellent wear protection.

•  Controlled friction properties — transmission of power is smooth and efficient throughout all normal temperature ranges.



Mobil ATF D/M is recommended by ExxonMobil for use in applications requiring: GM DEXRON® IIIH, Ford MERCON® and Allison C-4


Note: Mobil ATF D/M is not recommended for other applications, including GM DEXRON® VI, Ford MERCON® V , MERCON LV®, MERCON SP® and Type F ATF


Mobil ATF D/M also can be used as the lubricating oil in several types of rotary air compressors under certain service conditions. Its low-temperature properties and resistance to oxidation are important factors in meeting the requirements of this service. (Please consult the manufacturer service manual for required specifications before use).


Good maintenance practice dictates that automatic transmissions be checked for proper fluid levels at regular intervals, and that the fluid be drained and replaced at intervals recommended by the manufacturer. Some manufacturers recommend more frequent changes of transmission fluid under severe driving conditions.


Specifications and Approvals

This product is recommended for use in applications requiring:

Allison C-4




Properties and Specifications


ASTM Color, ASTM D1500


Flash Point, Cleveland Open Cup, C(F), ASTM D92

180 (356)

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445


Kinematic Viscosity @ 40 C, mm2/s, ASTM D445


Viscosity Index, ASTM D2270


Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983


Density @ 15.6 C, kg/l, ASTM D4052



Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @